UI: A axis surface (DRO row, jog, Home A, settings page)

Front-end side of the gplan-integrated A axis (B3).

- a-axis-view.{js,pug}: dedicated settings page that mounts the
  AAxisSettings Svelte component and lives at #a-axis in the V09
  settings rail.
- AAxisSettings.svelte: aux.json-backed form (axis letter, port,
  homing direction, soft limits, ATC pin map, etc.) with master
  Save integration via 'onefin:save-all'.
- main.ts + SettingsView.svelte: register AAxisSettings in the
  Svelte component map; SettingsView no longer embeds the W axis
  fieldset.
- settings-shell-view: 'A Axis' rail entry; route to a-axis-view.
- app.js: extend settings family to include 'a-axis'; broadcast
  onefin:save-all from the master Save button.
- control-view: Home All button waits for the gantry cycle to
  finish before firing Home A on a non-virtual setup; A jog
  buttons; aux_jog/aux_home/aux_jog_incr methods.
- control-view.pug: A row in the DRO (with set-position + zero +
  home actions), A- / A+ tiles in the jog grid (gated on
  w.enabled || a.enabled), legacy W row kept for installs that
  haven't migrated to the gplan integration.
- style.styl: dro-axis.axis-w color.

src/js/control-view.js

@@ -249,13 +249,83 @@ module.exports = {
       api.put(`home/${axis}/clear`);
     },
 
+    aux_home: function () {
+      api.put("aux/home").catch(function (err) {
+        console.error("Aux home failed:", err);
+      });
+    },
+
+    // Home every enabled axis (legacy Onefinity "Home All"). Sequence:
+    //   1. Z, X, Y (and A/B/C if enabled)  via /api/home on the AVR
+    //   2. Auxiliary axis                  via /api/aux/home on the ESP
+    //      ONLY when the auxcnc axis is not integrated as a virtual
+    //      machine axis. With the gplan A-axis integration (synthetic
+    //      motor 4 enabled), Mach.home() already homes the external
+    //      axis as part of the xyzabc pass - calling aux/home
+    //      afterwards would home it a second time.
+    // /api/home returns as soon as the request is queued, not when
+    // homing completes, so we have to watch state.cycle:
+    //   - first wait for it to *leave* 'idle' (cycle began),
+    //   - then wait for it to come *back* to 'idle' (cycle ended).
+    // Only then do we fire the auxiliary home, so the gantry and the
+    // auxcnc ESP never move at the same time.
     home_all: async function () {
       this.ask_home = false;
       try {
         await api.put("home");
       } catch (e) {
-        console.error("Home all failed:", e);
+        console.error("Home all (XYZ) failed:", e);
+        return;
       }
+      if (!this.w || !this.w.enabled) return;
+
+      // When the synthetic external motor (index 4) is enabled,
+      // the auxcnc axis is mapped onto a real machine axis letter
+      // (e.g. A) and was already homed by /api/home above.
+      if (this.state && this.state["4me"]) return;
+
+      const wait = (ms) => new Promise(r => setTimeout(r, ms));
+      const cycleNow = () => (this.state && this.state.cycle) || "idle";
+
+      // Phase 1: wait up to 5s for the homing cycle to actually start.
+      // If the request was rejected upstream (e.g. estopped) cycle
+      // never leaves idle and we bail rather than home A in isolation.
+      const startedAt = Date.now();
+      while (Date.now() - startedAt < 5000) {
+        if (cycleNow() != "idle") break;
+        await wait(100);
+      }
+      if (cycleNow() == "idle") {
+        console.warn("home_all: main homing cycle never started; skipping aux");
+        return;
+      }
+
+      // Phase 2: wait up to 2 minutes for the gantry to finish.
+      const settledAt = Date.now();
+      while (Date.now() - settledAt < 120000) {
+        if (cycleNow() == "idle") break;
+        await wait(200);
+      }
+      if (cycleNow() != "idle") {
+        console.warn("home_all: gantry homing did not complete in time");
+        return;
+      }
+
+      api.put("aux/home").catch(function (err) {
+        console.error("Aux home failed:", err);
+      });
+    },
+
+    aux_jog: function (delta_mm) {
+      api.put("aux/jog", { mm: delta_mm }).catch(function (err) {
+        console.error("Aux jog failed:", err);
+      });
+    },
+
+    aux_jog_incr: function (sign) {
+      const amount = this.jog_incr_amounts[this.display_units][this.jog_incr];
+      const delta_mm = sign * (this.metric ? amount : amount * 25.4);
+      this.aux_jog(delta_mm);
     },
 
     show_set_position: function (axis) {