ATC pneumatics in g-code (drop tool / grab tool / release clamp /
engage clamp) are expressed as M100..M103. AuxPreprocessor rewrites
those into (MSG,HOOK:droptool:) etc on file upload + on planner
load + on MDI input, so the Hooks layer (B1) can dispatch them via
registered ATC handlers in Ctrl.
- AuxPreprocessor.py: regex-based file rewriter, idempotent.
- FileHandler: invoke preprocessor on every upload.
- Planner.init: also re-preprocess on load (catches files written
before this version).
- Mach.mdi: same rewrite for ad-hoc MDI input so M101 typed at the
console produces a HOOK message.
- Ctrl: register the four ATC hooks (droptool/grabtool/release/clamp)
with block_unpause + auto_resume so programs using them pause at
the right point and resume cleanly. aux_home retained as a legacy
alias for older preprocessed files.
ExternalAxis exposes the auxcnc-driven ESP stepper as motor 4 (a
synthetic, host-only motor that gplan sees but the AVR doesn't). The
result is a virtual A axis that is fully integrated with the planner:
G1 A25 F1500 schedules a coordinated S-curve and the ESP runs the
exact same 7-segment trajectory the AVR would have run if A were a
real motor.
- ExternalAxis.py: synthetic-motor state, S-curve LINE block forward
to the ESP, soft-limit enforcement, option-(b) homing (user A=0
at the home limit).
- State: walk motors 0..4 in find_motor; clear both homed and h on
reset; expose synthetic motor vars.
- axis-vars.js: motor-4 guard so the JS computed axis bindings don't
throw when motor 4 has no entry in config.motors; resolve motor_id
for the synthetic axis by scanning state['4an'].
- Ctrl: instantiate ExternalAxis after AuxAxis, share the axis_letter
setting, wire AuxAxis state observer.
- Web: route /api/aux/{home,jog,move} through ExternalAxis when it
is enabled so the DRO and synthetic-motor flags stay in sync.
bbctrl.AuxAxis manages a stepper driven by an auxcnc-style ESP32
over /dev/ttyUSB0 (or whichever serial port). Persistent config in
aux.json; UI talks to it via /api/aux/* endpoints.
- AuxAxis: serial framing, position tracking, soft-limit enforcement,
homing state machine, ATC pneumatic control (M100..M103 wrappers).
- Ctrl: instantiate self.aux alongside the other subsystems and
close it during shutdown.
- Web: handlers for /api/aux/{config,status,home,abort,jog,move,set-zero}.
Adds bbctrl.Hooks: a small dispatch layer for HOOK:<event>:<data>
messages embedded in g-code as (MSG,HOOK:droptool:) etc. Hooks can
block the unpause until the registered callback completes and
auto-resume after.
- bbctrl.Hooks: registry, fire, dispatch_hook_message, persistent
config in hooks.json, REST surface (/api/hooks, /api/hooks/save,
/api/hooks/status, /api/hooks/fire/<event>).
- Ctrl: instantiate self.hooks alongside the other subsystems.
- Planner._add_message: when a (MSG,...) line is HOOK:<event>:<data>,
route it through ctrl.hooks instead of state.messages so it never
surfaces as a UI popup and dispatch is immediate (state.messages
has a 250ms debounce).
- Web: handlers for the /api/hooks routes.
bbctrl.Trace records monotonic-anchored events from process start.
Ctrl, Comm, the Web layer and __init__ are instrumented so a single
GET /api/diag/timing returns a full timeline of import, controller
init, AVR connection, first websocket, and first GET /. The
restart-timing.js client posts performance.now() marks back so the
browser side can be aligned in the same view.
Used to drive the cold-boot optimisations that reduce listen latency
on the Pi by ~8s.
