//-                           All rights reserved.                            //
//-                                                                           //
//-   This file ("the software") is free software: you can redistribute it    //
//-   and/or modify it under the terms of the GNU General Public License,     //
//-    version 2 as published by the Free Software Foundation. You should     //
//-    have received a copy of the GNU General Public License, version 2      //
//-   along with the software. If not, see <http://www.gnu.org/licenses/>.    //
//-                                                                           //
//-   The software is distributed in the hope that it will be useful, but     //
//-        WITHOUT ANY WARRANTY; without even the implied warranty of         //
//-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU      //
//-             Lesser General Public License for more details.               //
//-                                                                           //
//-     You should have received a copy of the GNU Lesser General Public      //
//-              License along with the software.  If not, see                //
//-                     <http://www.gnu.org/licenses/>.                       //
//-                                                                           //
//-              For information regarding this software email:               //
//-                "Joseph Coffland" <joseph@buildbotics.com>                 //
//-                                                                           //
//-/////////////////////////////////////////////////////////////////////////////

script#settings-view-template(type="text/x-template")
  #settings
    h1 Settings

    .pure-form.pure-form-aligned
      fieldset
        h2 Units
        templated-input(name="units", :model.sync="config.settings.units",
          :template="template.settings.units")

        p
          | Note, #[tt units] sets both the machine default units and the
          | units used in motor configuration.  GCode #[tt program-start],
          | set below, may also change the default machine units.

      fieldset
        h2 Probing safety prompts
        templated-input(name="probing-prompts",
          :model.sync="config.settings['probing-prompts']",
          :template="template.settings['probing-prompts']")

      fieldset
        h2 Probe Dimensions
        templated-input(v-for="templ in template.probe", :name="$key",
          :model.sync="config.probe[$key]", :template="templ")
      
      fieldset
        h2 GCode
        templated-input(v-for="templ in template.gcode", :name="$key",
          :model.sync="config.gcode[$key]", :template="templ")

      fieldset
        h2 Path Accuracy
        templated-input(name="max-deviation",
          :model.sync="config.settings['max-deviation']",
          :template="template.settings['max-deviation']")

        p.
          Lower #[tt max-deviation] to follow the programmed path more precisely
          but at a slower speed.

        p.
          In order to improve traversal speed, the path planner may merge
          consecutive moves or round off sharp corners if doing so would deviate
          from the program path by less than #[tt max-deviation].

        - var base = '//linuxcnc.org/docs/html/gcode/g-code.html'
        p.
          GCode commands
          #[a(href=base + "#gcode:g61", target="_blank") G61, G61.1] and
          #[a(href=base + "#gcode:g64", target="_blank") G64] also affect path
          planning accuracy.

        h2 Cornering Speed (Advanced)
        templated-input(name="junction-accel",
          :model.sync="config.settings['junction-accel']",
          :template="template.settings['junction-accel']")

        p.
          Junction acceleration limits the cornering speed the planner will
          allow.  Increasing this value will allow for faster traversal of
          corners but may cause the planner to violate axis jerk limits and
          stall the motors.  Use with caution.