Henrik Muehe
aa747dcc85
Pass -nocursor to startx so the mouse pointer never appears on the\nOnefinity touchscreen. Patched in all three boot paths: rc.local.fast\n(active), legacy rc.local, and the setup_rpi.sh bootstrap.
110 lines
3.2 KiB
Bash
110 lines
3.2 KiB
Bash
#!/bin/bash -e
|
|
|
|
export LC_ALL=C
|
|
cd /mnt/host
|
|
|
|
# Update the system
|
|
apt-get update
|
|
apt-get dist-upgrade -y
|
|
|
|
# Install packages
|
|
apt-get install -y avahi-daemon avrdude minicom python3-pip python3-smbus \
|
|
i2c-tools python3-rpi.gpio libjpeg8 wiringpi dnsmasq hostapd \
|
|
iptables-persistent chromium-browser xorg rpd-plym-splash samba
|
|
pip3 install --upgrade tornado sockjs-tornado pyserial
|
|
|
|
# Clean
|
|
apt-get autoclean
|
|
|
|
# Enable avahi
|
|
update-rc.d avahi-daemon defaults
|
|
|
|
# Change hostname
|
|
sed -i "s/raspberrypi/bbctrl/" /etc/hosts /etc/hostname
|
|
|
|
# Create bbmc user
|
|
useradd -m -p $(openssl passwd -1 buildbotics) -s /bin/bash bbmc
|
|
sed -i 's/pi$/pi,bbmc/g' /etc/group
|
|
passwd -l pi
|
|
|
|
# Disable console on serial port
|
|
sed -i 's/console=[a-zA-Z0-9]*,115200 \?//' /boot/cmdline.txt
|
|
|
|
# Disable i2c HAT ID probe
|
|
echo -n " bcm2708.vc_i2c_override=1" >> /boot/cmdline.txt
|
|
|
|
# Enable I2C
|
|
sed -i 's/#dtparam=i2c/dtparam=i2c/' /boot/config.txt
|
|
#echo 'dtparam=i2c_vc=on' >> /boot/config.txt
|
|
echo i2c-bcm2708 >> /etc/modules
|
|
echo i2c-dev >> /etc/modules
|
|
|
|
# Install bbctrl w/ init.d script
|
|
cp bbctrl.init.d /etc/init.d/bbctrl
|
|
chmod +x /etc/init.d/bbctrl
|
|
update-rc.d bbctrl defaults
|
|
|
|
# Disable Pi 3 USART BlueTooth swap
|
|
echo -e "\ndtoverlay=pi3-disable-bt" >> /boot/config.txt
|
|
rm -f /etc/systemd/system/multi-user.target.wants/hciuart.service
|
|
|
|
# Install hawkeye
|
|
dpkg -i hawkeye_0.6_armhf.deb
|
|
sed -i 's/localhost/0.0.0.0/' /etc/hawkeye/hawkeye.conf
|
|
echo 'ACTION=="add", KERNEL=="video0", RUN+="/usr/sbin/service hawkeye restart"' > /etc/udev/rules.d/50-hawkeye.rules
|
|
adduser hawkeye video
|
|
|
|
# Disable HDMI to save power and remount /boot read-only
|
|
sed -i 's/^exit 0$//' /etc/rc.local
|
|
echo "mount -o remount,ro /boot" >> /etc/rc.local
|
|
echo "gpio mode 27 alt3" >> /etc/rc.local # Enable serial CTS on pin 27
|
|
|
|
# Dynamic clock to save power
|
|
echo -e "\n# Dynamic clock\nnohz=on" >> /boot/config.txt
|
|
|
|
# Shave 2 sec off of boot time
|
|
echo -e "\n# Faster boot\ndtparam=sd_overclock=100" >> /boot/config.txt
|
|
|
|
# Enable ssh
|
|
touch /boot/ssh
|
|
|
|
# Fix boot
|
|
sed -i 's/ root=[^ ]* / root=\/dev\/mmcblk0p2/' /boot/cmdline.txt
|
|
sed -i 's/^PARTUUID=.*\/boot/\/dev\/mmcblk0p1 \/boot/' /etc/fstab
|
|
sed -i 's/^PARTUUID=.*\//\/dev\/mmcblk0p2 \//' /etc/fstab
|
|
|
|
# Enable browser in xorg
|
|
sed -i 's/allowed_users=console/allowed_users=anybody/' /etc/X11/Xwrapper.config
|
|
echo "sudo -u pi startx -- -nocursor" >> /etc/rc.local
|
|
cp /mnt/host/xinitrc /home/pi/.xinitrc
|
|
cp /mnt/host/ratpoisonrc /home/pi/.ratpoisonrc
|
|
cp /mnt/host/xorg.conf /etc/X11/
|
|
|
|
# Configure the screen to not do overscan (only necessary for TVs)
|
|
sed -i 's/^#disable_overscan/disable_overscan/' /boot/config.txt
|
|
|
|
# Boot splash
|
|
mkdir -p /usr/share/plymouth/themes/buildbotics/
|
|
cp -av /mnt/host/splash/* /usr/share/plymouth/themes/buildbotics/
|
|
echo -n " quiet splash logo.nologo plymouth.ignore-serial-consoles" >> /boot/cmdline.txt
|
|
plymouth-set-default-theme -R buildbotics
|
|
|
|
# Samba
|
|
# TODO install custom smb.conf
|
|
smbpasswd -a bbmc
|
|
|
|
# Install bbctrl
|
|
tar xf /mnt/host/bbctrl-*.tar.bz2
|
|
cd $(basename bbctrl-*.tar.bz2 .tar.bz2)
|
|
./setup.py install
|
|
cd ..
|
|
rm -rf $(basename bbctrl-*.tar.bz2 .tar.bz2)
|
|
|
|
|
|
# Allow any user to shutdown
|
|
chmod +s /sbin/{halt,reboot,shutdown,poweroff}
|
|
|
|
# Clean up
|
|
apt-get autoremove -y
|
|
apt-get autoclean -y
|