cleanup
This commit is contained in:
David Carley
466
CHANGELOG.md
466
CHANGELOG.md
@@ -1,466 +0,0 @@
|
||||
OneFinity CNC Controller Firmware Changelog
|
||||
===========================================
|
||||
|
||||
## v1.0.8
|
||||
- Fixed chatter and lost steps issues (most commonly seen by Fusion users), re-enabled support for G61, G61.1, G64.
|
||||
- Fixed 3d preview on Safari-based web browsers (MacOS & iOS)
|
||||
- Made it less likely for a user to upload a non-gcode file
|
||||
- Fixed problems with UI freezing when attempting to process a non-gcode file
|
||||
- Simplified error popup to make it less confusing
|
||||
- Improved error messages for most internal errors
|
||||
|
||||
## v1.0.7
|
||||
- Cleaned up UI layout a bit on the main screen
|
||||
- Enabled auto expansion of partition and file system to fill SD card on first boot
|
||||
- Added probe continuity test before probing (pop-up dialog)
|
||||
- Added a popup after probing, reminding the user to put away the probe
|
||||
- Lowered default probe seek speed
|
||||
- Fixed file drop-down menu showing old files
|
||||
- Added file system watcher for uploaded files
|
||||
- Improved support for large gcode files, improves performance on Raspi
|
||||
- Fixed a bug where the UI could become unresponsive at boot, or when uploading the first gcode file
|
||||
- Changed default max-deviation to 0.001 to reduce issues with chattering while cutting arcs and circles
|
||||
- Hides ratpoison (window manager) message during boot up
|
||||
- Disabled G61, G61.1, G64 gcodes until the root cause of circle chatter is identified and fixed
|
||||
- Increased icon size on the main GUI
|
||||
- Improved version comparison logic for handling public beta releases in the future
|
||||
- Changed default max-jerk to 1000 for X/Y axes
|
||||
- Changed default idle current to 1A
|
||||
- Force-set some critical configuration values to help with reliability
|
||||
- Metric units only for junction-accel and max-deviation
|
||||
- Rewrote the homing procedure to be more consistent
|
||||
- Small improvements to the stall homing procedure
|
||||
- Fixed error messages in the console (webgl)
|
||||
- Fixed styling bug with error dialog
|
||||
- Added a setting to allow enable/disable of probing safety prompts
|
||||
|
||||
## v1.0.6
|
||||
- Tweaked stall homing procedure to clear stepper stall condition before homing
|
||||
- Modified motor homing parameters (8 microsteps, 1.688 m/min search velocity, 2 stall volts, 1 stall current, 1.5mm zero backoff)
|
||||
- Added pop up message while loading/simulating file on upload
|
||||
- Decreased max velocity in default settings for X and Y axes
|
||||
- Restored jerk to 1000 on all axes
|
||||
- Fixed issue with default units not displaying on Control page (thanks to Robin Goldstone)
|
||||
|
||||
## v1.0.5
|
||||
- Changed the jog commands so that save/restore modal states are not used to avoid situation where spindle/loads could
|
||||
turn back on if the stop button was used instead of the M5/M9 gcode commands.
|
||||
- Added tool path status to control page
|
||||
- Moved over/under/no-fit warnings to tool status from machine status
|
||||
- Added "home machine" pop up on start if the machine is not homed
|
||||
- Added confirmation for X0Y0 and Z0 buttons
|
||||
|
||||
## v1.0.4
|
||||
- Fixed text sticking out of some dialog boxes
|
||||
- Added changes to PWR microcontroller to support new precharge circuitry on V3 of the PCB
|
||||
- Added a Shutdown button under the menu
|
||||
- Added confirmation dialog to shutdown
|
||||
- Fixed Reset Defaults for OneFinity settings
|
||||
- Probe buttons now turn green when probe input is active
|
||||
- Added defaults for both machinist and woodworker machines
|
||||
- Re-activated "Upgrade" button under Admin to grab updates directly from the web
|
||||
|
||||
## v1.0.3
|
||||
- Changed upgrade scripts to point at OneFinity github repository
|
||||
- Upgrade function not yet fully implemented
|
||||
|
||||
## v1.0.2
|
||||
- Initial release of customized OneFinity firmware
|
||||
- Includes GUI customizations, stall homing
|
||||
|
||||
Note: This firmware was forked from version 0.4.14 of the Buildbotics firmware
|
||||
|
||||
Buildbotics CNC Controller Firmware Changelog
|
||||
=============================================
|
||||
|
||||
## v0.4.14
|
||||
- Handle file uploads with '#' or '?' in the name.
|
||||
- Added "step mode" to Web based jogging.
|
||||
- Fixed touch screen Web jogging.
|
||||
|
||||
## v0.4.13
|
||||
- Support for OMRON MX2 VFD.
|
||||
- Better error handling in WiFi configuration.
|
||||
- Fix open WiFi access.
|
||||
- Improved video camera performance.
|
||||
- Allow up to 4 camera clients at once.
|
||||
- Add axis bounds GCode variables ``#<_x_min>``, ``#<_x_max>``, etc.
|
||||
- Expose ``junction-accel`` planning parameter.
|
||||
- Fixed problem with manual firmware upload on OSX.
|
||||
- Ignore cameras that do not support MJPEG format video.
|
||||
|
||||
## v0.4.12
|
||||
- Segments straddle arc in linearization.
|
||||
- Control max-arc-error with GCode var.
|
||||
- Implemented path modes G61, G61.1 & G64 with naive CAM and basic blending.
|
||||
- Log GCode messages to "Messages" tab.
|
||||
- Acknowledging a message on one browser clears it for all.
|
||||
- Automatically reload Web view when file changes.
|
||||
- Added ``config-screen`` script. Web based screen config to come later.
|
||||
- Suppress message popup with (MSG,# No popup message).
|
||||
- Show latest GCode message in ``Message`` field on CONTROL page.
|
||||
- Marked several GCodes supported in cheat sheet.
|
||||
- Solved planner lookahead failure for most reasonable cases.
|
||||
- Prevent cutting off distant parts of 3D path view.
|
||||
- Raised default ``latch-backoff`` to 100mm and ``zero-backoff`` to 5mm.
|
||||
- Added ``max-deviation`` option.
|
||||
- Fixed problem with GCode boolean expression parsing. #232.
|
||||
- Ensure 2uS step pulse width.
|
||||
|
||||
## v0.4.11
|
||||
- Don't reset global offsets on M2.
|
||||
- Test shunt and show error on failure.
|
||||
- Report spindle status codes from Modbus.
|
||||
- Save more log files in bug report.
|
||||
- Fixed indicators low-side units.
|
||||
- Support for YL600, YL620 & YL620-A VFDs.
|
||||
- Move Modbus indicators to tool page.
|
||||
- Support for Sunfar E300 VFD.
|
||||
- Set GCODE_SCRIPT_PATH to support GCode file routines.
|
||||
- Fix pause bug introduced in v0.4.10.
|
||||
|
||||
## v0.4.10
|
||||
- Fix demo password check
|
||||
- Fix bug were fast clicks could cause jog commands to arrive out of order.
|
||||
- Fix bug where planner position may not sync after jog.
|
||||
- Show power shutdown on indicators page.
|
||||
- Show all motors in shutdown when in power shutdown.
|
||||
- Improved GCode error messages.
|
||||
- Put controller into estop when in power shutdown.
|
||||
|
||||
## v0.4.9
|
||||
- Enforce 6A per motor channel peak current limit.
|
||||
- Adjust config values above max or below min instead of resetting to default.
|
||||
|
||||
## v0.4.8
|
||||
- Fixed log rotating.
|
||||
- Use systemd service instead of init.d.
|
||||
- Fix planner terminate.
|
||||
- Changed AVR serial interrupt priorites.
|
||||
- Increased AVR serial and command buffers.
|
||||
- Boost HDMI signal.
|
||||
- Rewrote RPi serial driver.
|
||||
- Automatically scale max CPU speed to reduce RPi temp.
|
||||
- Disable USB camera if RPi temperature above 80°C, back on at 75°C.
|
||||
- Respect offsets in canned cycle moves. #219
|
||||
- Fixed G53 warning.
|
||||
- Fixed delayed offset update after M2 or M30 end of program.
|
||||
- Handle multiple consecutive config resets correctly.
|
||||
- Fixed log CPU usage problem introduced in v0.4.6.
|
||||
- Show RPi temp on indicators page.
|
||||
- Show red thermometer if RPi temp exceeds 80°C.
|
||||
|
||||
## v0.4.7
|
||||
- Fix homing switch to motor channel mapping with non-standard axis order.
|
||||
- Added ``switch-debounce`` and ``switch-lockout`` config options.
|
||||
- Handle corrupt GCode simulation data correctly.
|
||||
- Fixes for exception logging.
|
||||
- Always limit motor max-velocity. #209
|
||||
- Sync GCode and planner files to disk after write.
|
||||
- Added warning about reliability in a noisy environment on WiFi config page.
|
||||
- EStop on motor fault.
|
||||
- Fixed ETA line wrapping on Web interface.
|
||||
- Fixed zeroing with non-zero offset when unhomed. #211
|
||||
- Handle file paths uploaded from Windows correctly. #212
|
||||
- Don't retain estop state through reboot.
|
||||
- Log when RPi gets hot.
|
||||
- Support Modbus multi-write mode.
|
||||
- Added support for Nowforever VFDs.
|
||||
|
||||
## v0.4.6
|
||||
- Fixed a rare ``Negative s-curve time`` error.
|
||||
- Don't allow manual axis homing when soft limits are not set.
|
||||
- Right click to enable camera crosshair.
|
||||
- Demo mode.
|
||||
- Limit idle-current to 2A.
|
||||
- Removed dangerous ``power-mode`` in favor of simpler ``enabled`` option.
|
||||
- Fixed bug where motor driver could fail to disabled during estop.
|
||||
- Restored estop text.
|
||||
|
||||
## v0.4.5
|
||||
- Fix for random errors while running VFD.
|
||||
- Fix bug where planner would not continue after optional pause (M1).
|
||||
- Fix lockup on invalid no move probe G38.x. #183
|
||||
- Fix zeroing homed axis after jog.
|
||||
- Fix VFD communication at higher baud rates (> 9600). #184
|
||||
|
||||
## v0.4.4
|
||||
- Write version to log file.
|
||||
- Write time to log file periodically.
|
||||
- Show simulation progress with or with out 3D view.
|
||||
- Synchronize file list between browsers.
|
||||
- Increased max simulation time to 24hrs.
|
||||
- Added button to download current GCode file.
|
||||
- Blink play button to indicate pause.
|
||||
- Many layout tweaks/improvements.
|
||||
- Don't abort simulations when system time changes.
|
||||
- Only allow one camera stream at a time.
|
||||
|
||||
## v0.4.2
|
||||
- Suppress ``Auto-creating missing tool`` warning.
|
||||
- Prevent ``Stream is closed`` error.
|
||||
- Suppress ``WebGL not supported`` warning.
|
||||
- Fixed Web disconnect during simulation of large GCode.
|
||||
- Disable outputs on estop.
|
||||
- Improved switch debouncing for better homing.
|
||||
- Handle zero length dwell correctly.
|
||||
- Fixed problem with cached GCode file upload when file changed on disk.
|
||||
- Run simulation at low process priority.
|
||||
- Added ``Bug Report`` button to ``Admin`` -> ``General``.
|
||||
- Only render 3D view as needed to save CPU.
|
||||
- Prevent lockup due to browser causing out of memory condition.
|
||||
- Show error message when too large GCode upload fails.
|
||||
- Much faster 3D view loading.
|
||||
|
||||
## v0.4.1
|
||||
- Fix toolpath view axes bug.
|
||||
- Added LASER intensity view.
|
||||
- Fixed reverse path planner bug.
|
||||
- Video size and path view controls persistent over browser reload.
|
||||
- Fixed time and progress bugs.
|
||||
- Added PWM rapid auto off feature for LASER/Plasma.
|
||||
- Added dynamic PWM for LASER/Plasma.
|
||||
- Added motor faults table to indicators page.
|
||||
- Emit error and indicate FAULT on axis for motor driver faults.
|
||||
- Display axis motor FAULT on LCD.
|
||||
- Fixed bug with rapid repeated unpause.
|
||||
|
||||
## v0.4.0
|
||||
- Increased display precision of position and motor config.
|
||||
- Added support for 256 microstepping.
|
||||
- Smoother operation at 250k step rate by doubling clock as needed.
|
||||
- Indicators tab improvements.
|
||||
- Much improved camera support.
|
||||
- Camera hotpluging.
|
||||
- Move camera video to header.
|
||||
- Click to switch video size.
|
||||
- Automount/unmount USB drives.
|
||||
- Automatically install ``buildbotics.gc`` when no other GCode exists.
|
||||
- Preplan GCode and check for errors.
|
||||
- Display 3D view of program tool paths in browser.
|
||||
- Display accurate time remaining, ETA and progress during run.
|
||||
- Automatically collapse moves in planner which are too short in time.
|
||||
- Show IO status indicators on configuration pages.
|
||||
- Check that axis dimensions fit path plan dimensions.
|
||||
- Show machine working envelope in path plan viewer.
|
||||
- Don't reload browser view on reconnect unless controller has reloaded.
|
||||
- Increased max switch backoff search distance.
|
||||
- Major improvements for LASER raster GCodes.
|
||||
- Fixed major bug in command queuing.
|
||||
- Ignore Program Number O-Codes.
|
||||
- Improved planning of collinear line segments.
|
||||
- Allow PWM output up to 320kHz and no slower than 8Hz.
|
||||
|
||||
## v0.3.28
|
||||
- Show step rate on motor configuration page.
|
||||
- Limit motor max-velocity such that step rate cannot exceed 250k.
|
||||
- Fixed deceleration bug at full 250k step rate.
|
||||
|
||||
## v0.3.27
|
||||
- Fixed homing in imperial mode.
|
||||
|
||||
## v0.3.26
|
||||
- Removed VFD test.
|
||||
- Show VFD status on configuration page.
|
||||
- Show VFD commands fail counts.
|
||||
- Marked some VFD types as beta.
|
||||
|
||||
## v0.3.25
|
||||
- Error on home if max-soft-limit <= min-soft-limit + 1. #139
|
||||
- Decrease boot time networking delay.
|
||||
- Default to US keyboard layout. #145
|
||||
- Added configuration option to show metric or imperial units in browser. #74
|
||||
- Implemented fine jogging control in Web interface. #147
|
||||
|
||||
## v0.3.24
|
||||
- Added unhome button on axis position popup.
|
||||
- Ignore soft limits of max <= min.
|
||||
- Fixed problem with restarting program in imperial units mode.
|
||||
- Handle GCode with infinite or very long loops correctly.
|
||||
- Fixed Huanyang spindle restart after stop.
|
||||
|
||||
## v0.3.23
|
||||
- Fix for modbus read operation.
|
||||
- Finalized AC-Tech VFD support.
|
||||
- Preliminary FR-D700 VFD support.
|
||||
- Ignore leading zeros in modbus messages.
|
||||
- Handle older PWR firmwares.
|
||||
|
||||
## v0.3.22
|
||||
- Fix position loss after program pause. #130
|
||||
- Correctly handle disabled axes.
|
||||
- Fixed config checkbox not displaying defaulted enabled correctly.
|
||||
- Added Custom Modbus VFD programming.
|
||||
|
||||
## v0.3.21
|
||||
- Implemented M70-M73 modal state save/restore.
|
||||
- Added support for modbus VFDs.
|
||||
- Start Huanyang spindle with out first pressing Start button on VFD.
|
||||
- Faster switching of large GCode files in Web.
|
||||
- Fixed reported gcode line off by one.
|
||||
- Disable MDI input while running.
|
||||
- Stabilized direction pin output during slow moves.
|
||||
|
||||
## v0.3.20
|
||||
- Eliminated drift caused by miscounting half microsteps.
|
||||
- Fixed disappearing GCode in Web.
|
||||
- More efficient GCode scrolling with very large files.
|
||||
- Fully functional soft-limited jogging.
|
||||
- Added client and access-point Wifi configuration.
|
||||
- Fixed broken hostname Web redirect after change.
|
||||
- Split admin page -> General & Network.
|
||||
- Improved calculation of junction velocity limits.
|
||||
|
||||
## v0.3.19
|
||||
- Fixed stopping problems. #127
|
||||
- Fixed ``Negative s-curve time`` error.
|
||||
- Improved jogging with soft limits.
|
||||
- Added site favicon.
|
||||
- Fixed problems with offsets and imperial units.
|
||||
- Fixed ``All zero s-curve times`` caused by extremely short, non-zero moves.
|
||||
- Fixed position drift.
|
||||
|
||||
## v0.3.18
|
||||
- Don't enable any tool by default.
|
||||
|
||||
## v0.3.17
|
||||
- Fixed pausing fail near end of run bug.
|
||||
- Show "Upgrading firmware" when upgrading.
|
||||
- Log excessive pwr communication failures as errors.
|
||||
- Ensure we can still get out of non-idle cycles when there are errors.
|
||||
- Less frequent pwr variable updates.
|
||||
- Stop cancels seek and subsequent estop.
|
||||
- Fixed bug in AVR/Planner command synchronization.
|
||||
- Consistently display HOMING state during homing operation.
|
||||
- Homing zeros axis global offset.
|
||||
- Added zero all button. #126
|
||||
- Separate "Auto" and "MDI" play/pause & stop buttons. #126
|
||||
- Moved home all button. #126
|
||||
- Display "Video camera not found." instead of broken image icon.
|
||||
- Show offset positions not absolute on LCD.
|
||||
- Don't change gcode lines while homing.
|
||||
- Don't change button states while homing.
|
||||
- Adding warning about power cyclying during an upgrade.
|
||||
- Reset planner on AVR errors.
|
||||
- Fixed pausing with short moves.
|
||||
- Corrected s-curve accel increasing jogging velocities.
|
||||
|
||||
## v0.3.16
|
||||
- Fixed switch debounce bug.
|
||||
|
||||
## v0.3.15
|
||||
- Suppress warning missing config.json warning after config reset.
|
||||
- Fixed EStop reboot loop.
|
||||
- Removed AVR unexpected reboot error.
|
||||
|
||||
## v0.3.14
|
||||
- Fixed: Config fails silently after web disconnect #112
|
||||
- Always reload the page after a disconnect.
|
||||
- Honor soft limits #111 (but not when jogging)
|
||||
- Limit switch going active while moving causes estop. #54
|
||||
- Added more links to help page.
|
||||
- Fixed axis display on LCD. #122
|
||||
- Added GCode cheat sheet.
|
||||
- Fixed LCD boot splash screen. #121
|
||||
- Implemented tool change procedures and pause message box. #81
|
||||
- Implemented program start and end procedures.
|
||||
|
||||
## v0.3.13
|
||||
- Disable spindle and loads on stop.
|
||||
- Fixed several state transition (stop, pause, estop, etc.) problems.
|
||||
|
||||
## v0.3.12
|
||||
- Updated DB25 M2 breakout diagram.
|
||||
- Enabled AVR watchdog.
|
||||
- Fixed problem with selecting newly uploaded file.
|
||||
- More thorough shutdown of stepper driver in estop.
|
||||
- Fixed spindle type specific options.
|
||||
- No more ``Unexpected AVR firmware reboot`` errors on estop clear.
|
||||
- Downgraded ``Machine alarmed - Command not processed`` errors to warnings.
|
||||
- Suppress unnecessary axis homing warnings.
|
||||
- More details for axis homing errors.
|
||||
- Support GCode messages e.g. (MSG, Hello World!)
|
||||
- Support programmed pauses. i.e. M0
|
||||
|
||||
## v0.3.11
|
||||
- Suppressed ``firmware rebooted`` warning.
|
||||
- Error on unexpected AVR reboot.
|
||||
- Fixed pin fault output.
|
||||
- No longer using interrupts for switch inputs. Debouncing on clock tick.
|
||||
|
||||
## v0.3.10
|
||||
- Fixed "Flood" display, changed to "Load 1" and "Load 2". #108
|
||||
- Highlight loads when on.
|
||||
- Fixed axis zeroing.
|
||||
- Fixed bug in home position set after successful home. #109
|
||||
- Fixed ugly Web error dumps.
|
||||
- Allow access to log file from Web.
|
||||
- Rotate log so it does not grow too big.
|
||||
- Keep same GCode file through browser reload. #20
|
||||
|
||||
## v0.3.9
|
||||
- Fixed bug in move exec that was causing bumping between moves.
|
||||
- Fixed planner bug which could create negative s-curve times.
|
||||
- Hide step and optional pause buttons until they are implemented.
|
||||
- Fixed pausing problems.
|
||||
- Limit number of console messages.
|
||||
- Scrollbar on console view.
|
||||
- Log debug messages to console in developer mode.
|
||||
- Fixed AVR log message source.
|
||||
- Fixed step correction.
|
||||
- JOGGING, HOMMING and MDI states.
|
||||
- Fixed position problem with rapid MDI entry.
|
||||
|
||||
## v0.3.8
|
||||
- Fixed pwr flags display
|
||||
- Added pwr fault flags to indicators
|
||||
|
||||
## v0.3.7
|
||||
- Allow blocking error dialog for a period of time
|
||||
- Show actual error message on planner errors
|
||||
- Reset planner on serious error
|
||||
- Fixed console clear
|
||||
- Added helpful info to Video tab
|
||||
- Changed "Console" tab to "Messages"
|
||||
- Removed spin up/down velocity options, they don't do anything
|
||||
- Allow RS485 to work when wires are swapped
|
||||
- Allow setting VFD ID
|
||||
- Only show relevant spindle config items
|
||||
- More robust video camera reset
|
||||
- Added help page
|
||||
- Allow upgrade with out Internet
|
||||
- Limit power fault reporting
|
||||
- Added load over temp, load limiting and motor overload power faults
|
||||
|
||||
## v0.3.6
|
||||
- Set max_usb_current=1 in /boot/config.txt from installer #103
|
||||
|
||||
## v0.3.5
|
||||
- Fixed dwell (G4)
|
||||
- Always show limit switch indicators regardless of motor enable
|
||||
- Fixed feed rate display
|
||||
- Added current GCode unit display
|
||||
- Fixed homed axis zeroing
|
||||
- Fixed probe pin input
|
||||
- Added reload button to video tab
|
||||
- Don't open error dialog on repeat messages
|
||||
- Handle large GCode files in browser
|
||||
- Added max lookahead limit to planner
|
||||
- Fixed GCode stopping/pausing where ramp down needs more than is in the queue
|
||||
- Added breakout box diagram to indicators
|
||||
- Initialize axes offsets to zero on startup
|
||||
- Fixed conflict between ``x`` state variable and ``x`` axis variable
|
||||
- Don't show ipv6 addresses on LCD. They don't fit.
|
||||
|
||||
## v0.3.4
|
||||
- Added alternate units for motor parameters
|
||||
- Automatic config file upgrading
|
||||
- Fixed planner/jog sync
|
||||
- Fixed planner limits config
|
||||
- Accel units mm/min² -> m/min²
|
||||
- Search and latch velocity mm/min -> m/min
|
||||
- Fixed password update (broken in last version)
|
||||
- Start Web server earlier in case of Python coding errors
|
||||
|
||||
|
||||
Changelog not maintained in previous versions. See git commit log.
|
||||
22
CODE_TAG
22
CODE_TAG
@@ -1,22 +0,0 @@
|
||||
This file is part of the Buildbotics firmware.
|
||||
|
||||
Copyright (c) 2015 - 2018, Buildbotics LLC
|
||||
All rights reserved.
|
||||
|
||||
This file ("the software") is free software: you can redistribute it
|
||||
and/or modify it under the terms of the GNU General Public License,
|
||||
version 2 as published by the Free Software Foundation. You should
|
||||
have received a copy of the GNU General Public License, version 2
|
||||
along with the software. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
The software is distributed in the hope that it will be useful, but
|
||||
WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with the software. If not, see
|
||||
<http://www.gnu.org/licenses/>.
|
||||
|
||||
For information regarding this software email:
|
||||
"Joseph Coffland" <joseph@buildbotics.com>
|
||||
47
Makefile
47
Makefile
@@ -22,12 +22,8 @@ RSYNC_OPTS := $(RSYNC_EXCLUDE) -rv --no-g --delete --force
|
||||
|
||||
VERSION := $(shell sed -n 's/^.*"version": "\([^"]*\)",.*$$/\1/p' package.json)
|
||||
PKG_NAME := bbctrl-$(VERSION)
|
||||
PUB_PATH := root@buildbotics.com:/var/www/buildbotics.com/bbctrl
|
||||
BETA_VERSION := $(VERSION)-rc$(shell ./scripts/next-rc)
|
||||
BETA_PKG_NAME := bbctrl-$(BETA_VERSION)
|
||||
|
||||
SUBPROJECTS := avr boot pwr jig
|
||||
WATCH := src/pug src/pug/templates src/stylus src/js src/resources src/svelte-components src/static Makefile
|
||||
|
||||
ifndef HOST
|
||||
HOST=onefinity
|
||||
@@ -37,16 +33,12 @@ ifndef PASSWORD
|
||||
PASSWORD=onefinity
|
||||
endif
|
||||
|
||||
|
||||
all: $(HTML) $(RESOURCES)
|
||||
@for SUB in $(SUBPROJECTS); do $(MAKE) -C src/$$SUB; done
|
||||
|
||||
pkg: all $(AVR_FIRMWARE) bbserial
|
||||
./setup.py sdist
|
||||
|
||||
beta-pkg: pkg
|
||||
cp dist/$(PKG_NAME).tar.bz2 dist/$(BETA_PKG_NAME).tar.bz2
|
||||
|
||||
bbserial:
|
||||
$(MAKE) -C src/bbserial
|
||||
|
||||
@@ -74,15 +66,6 @@ $(GPLAN_IMG):
|
||||
$(AVR_FIRMWARE):
|
||||
$(MAKE) -C src/avr
|
||||
|
||||
publish: pkg
|
||||
echo -n $(VERSION) > dist/latest.txt
|
||||
rsync $(RSYNC_OPTS) dist/$(PKG_NAME).tar.bz2 dist/latest.txt $(PUB_PATH)/
|
||||
|
||||
publish-beta: beta-pkg
|
||||
echo -n $(BETA_VERSION) > dist/latest-beta.txt
|
||||
rsync $(RSYNC_OPTS) dist/$(BETA_PKG_NAME).tar.bz2 dist/latest-beta.txt \
|
||||
$(PUB_PATH)/
|
||||
|
||||
update: pkg
|
||||
http_proxy= curl -i -X PUT -H "Content-Type: multipart/form-data" \
|
||||
-F "firmware=@dist/$(PKG_NAME).tar.bz2" -F "password=$(PASSWORD)" \
|
||||
@@ -122,34 +105,4 @@ $(TARGET_DIR)/%.html: src/pug/%.pug node_modules FORCE
|
||||
@mkdir -p $(TARGET_DIR)
|
||||
$(PUG) -O pug-opts.js -P $< -o $(TARGET_DIR) || (rm -f $@; exit 1)
|
||||
|
||||
pylint:
|
||||
pylint3 -E $(shell find src/py -name \*.py | grep -v flycheck_)
|
||||
|
||||
jshint:
|
||||
./node_modules/jshint/bin/jshint --config jshint.json src/js/*.js
|
||||
|
||||
lint: pylint jshint
|
||||
|
||||
watch:
|
||||
@clear
|
||||
$(MAKE)
|
||||
@while sleep 1; do \
|
||||
inotifywait -qr -e modify -e create -e delete \
|
||||
--exclude .*~ --exclude \#.* $(WATCH); \
|
||||
clear; \
|
||||
$(MAKE); \
|
||||
done
|
||||
|
||||
tidy:
|
||||
rm -f $(shell find "$(DIR)" -name \*~)
|
||||
|
||||
clean: tidy
|
||||
rm -rf build html dist
|
||||
@for SUB in $(SUBPROJECTS); do \
|
||||
$(MAKE) -C src/$$SUB clean; \
|
||||
done
|
||||
|
||||
dist-clean: clean
|
||||
rm -rf node_modules
|
||||
|
||||
.PHONY: all install clean tidy pkg gplan lint pylint jshint bbserial
|
||||
|
||||
1
package-lock.json
generated
1
package-lock.json
generated
@@ -7,6 +7,7 @@
|
||||
"": {
|
||||
"name": "bbctrl",
|
||||
"version": "1.0.10b6",
|
||||
"hasInstallScript": true,
|
||||
"license": "GPL-3.0+",
|
||||
"dependencies": {
|
||||
"browserify": "^17.0.0",
|
||||
|
||||
@@ -4,6 +4,9 @@
|
||||
"homepage": "https://onefinitycnc.com/",
|
||||
"repository": "https://github.com/OneFinityCNC/onefinity",
|
||||
"license": "GPL-3.0+",
|
||||
"scripts": {
|
||||
"postinstall": "cd src/svelte-components && npm i"
|
||||
},
|
||||
"dependencies": {
|
||||
"browserify": "^17.0.0",
|
||||
"jshint": "^2.13.4",
|
||||
|
||||
@@ -1,37 +0,0 @@
|
||||
#!/usr/bin/env python3
|
||||
|
||||
'''Check that the configuration variable template used on the RPi matches the
|
||||
variables used in the AVR'''
|
||||
|
||||
import sys
|
||||
import json
|
||||
|
||||
templ = json.load(open('src/resources/config-template.json', 'r'))
|
||||
vars = json.load(open('avr/build/vars.json', 'r'))
|
||||
|
||||
|
||||
def check(section):
|
||||
errors = 0
|
||||
|
||||
for name, entry in section.items():
|
||||
if 'type' in entry:
|
||||
ok = False
|
||||
|
||||
# TODO check that defaults are valid
|
||||
# TODO check that types match
|
||||
|
||||
if 'code' in entry and not entry['code'] in vars:
|
||||
print('"%s" with code "%s" not found' % (name, entry['code']))
|
||||
|
||||
else: ok = True
|
||||
|
||||
if not ok: errors += 1
|
||||
|
||||
else: errors += check(entry)
|
||||
|
||||
return errors
|
||||
|
||||
|
||||
errors = check(templ)
|
||||
print('\n%d errors' % errors)
|
||||
sys.exit(errors != 0)
|
||||
@@ -1,17 +0,0 @@
|
||||
#!/bin/bash -ex
|
||||
|
||||
ROOT="$PWD/demo"
|
||||
|
||||
# Clean up on EXIT
|
||||
function cleanup {
|
||||
umount "$ROOT"/{dev/pts,dev,sys,proc} 2>/dev/null || true
|
||||
}
|
||||
trap cleanup EXIT
|
||||
|
||||
# mount binds
|
||||
mount --bind /dev "$ROOT/dev/"
|
||||
mount --bind /sys "$ROOT/sys/"
|
||||
mount --bind /proc "$ROOT/proc/"
|
||||
mount --bind /dev/pts "$ROOT/dev/pts"
|
||||
|
||||
chroot "$ROOT" "$@"
|
||||
@@ -93,6 +93,14 @@ if [ $? -ne 0 ]; then
|
||||
REBOOT=true
|
||||
fi
|
||||
|
||||
# Set the default locale to en_US
|
||||
grep '^en_US.UTF-8 UTF-8' /etc/locale.gen >/dev/null
|
||||
if [ $? -ne 0 ]; then
|
||||
perl -pi -e 's/# en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/g' /etc/locale.gen
|
||||
locale-gen en_US.UTF-8
|
||||
update-locale en_US.UTF-8
|
||||
fi
|
||||
|
||||
# Install .Xresources & .xinitrc
|
||||
cp scripts/Xresources ~pi/.Xresources
|
||||
chown pi:pi ~pi/.Xresources
|
||||
|
||||
@@ -1,27 +0,0 @@
|
||||
#!/usr/bin/env python3
|
||||
|
||||
import json
|
||||
import sys
|
||||
|
||||
p = [0, 0, 0]
|
||||
|
||||
|
||||
print('F400 G21')
|
||||
|
||||
for line in sys.stdin:
|
||||
try:
|
||||
if not line.startswith('I:Comm:> '): continue
|
||||
line = line[9:]
|
||||
|
||||
data = json.loads(line)
|
||||
|
||||
changed = False
|
||||
for axis in range(3):
|
||||
var = 'xyz'[axis] + 'p'
|
||||
if var in data:
|
||||
p[axis] = data[var]
|
||||
changed = True
|
||||
|
||||
if changed: print('G1 X%d Y%d Z%d' % tuple(p))
|
||||
|
||||
except json.decoder.JSONDecodeError: pass
|
||||
@@ -1,23 +0,0 @@
|
||||
#!/usr/bin/env python3
|
||||
|
||||
import sys
|
||||
import subprocess
|
||||
import os.path
|
||||
import time
|
||||
|
||||
if not os.path.exists('/dev/video0'):
|
||||
print('/dev/video0 not found')
|
||||
sys.exit(1)
|
||||
|
||||
p = subprocess.Popen('udevadm info -q path /dev/video0'.split(),
|
||||
stdout = subprocess.PIPE)
|
||||
s = p.communicate()[0].decode('utf-8')
|
||||
dev = s.split('/')[7]
|
||||
|
||||
with open('/sys/bus/usb/drivers/usb/unbind', 'w') as f:
|
||||
f.write(dev)
|
||||
|
||||
time.sleep(1)
|
||||
|
||||
with open('/sys/bus/usb/drivers/usb/bind', 'w') as f:
|
||||
f.write(dev)
|
||||
@@ -1,16 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
USER=bbmc
|
||||
HOST=bbctrl.local
|
||||
|
||||
if [ $# -eq 1 ]; then
|
||||
if [[ "$1" = *@ ]]; then
|
||||
LOGIN="$1"
|
||||
else
|
||||
LOGIN=$USER@"$1"
|
||||
fi
|
||||
else
|
||||
LOGIN=$USER@$HOST
|
||||
fi
|
||||
|
||||
ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no "$LOGIN"
|
||||
@@ -1,64 +0,0 @@
|
||||
function convertToAbsolute(path) {
|
||||
var x0, y0, x1, y1, x2, y2, segs = path.pathSegList;
|
||||
|
||||
for (var x = 0, y = 0, i = 0, len = segs.numberOfItems; i < len; i++) {
|
||||
var seg = segs.getItem(i), c = seg.pathSegTypeAsLetter;
|
||||
|
||||
if (/[MLHVCSQTA]/.test(c)){
|
||||
if ('x' in seg) x = seg.x;
|
||||
if ('y' in seg) y = seg.y;
|
||||
|
||||
} else {
|
||||
if ('x1' in seg) x1 = x + seg.x1;
|
||||
if ('x2' in seg) x2 = x + seg.x2;
|
||||
if ('y1' in seg) y1 = y + seg.y1;
|
||||
if ('y2' in seg) y2 = y + seg.y2;
|
||||
if ('x' in seg) x += seg.x;
|
||||
if ('y' in seg) y += seg.y;
|
||||
|
||||
switch(c) {
|
||||
case 'm':
|
||||
segs.replaceItem(path.createSVGPathSegMovetoAbs(x, y), i);
|
||||
break;
|
||||
case 'l':
|
||||
segs.replaceItem(path.createSVGPathSegLinetoAbs(x, y), i);
|
||||
break;
|
||||
case 'h':
|
||||
segs.replaceItem(path.createSVGPathSegLinetoHorizontalAbs(x), i);
|
||||
break;
|
||||
case 'v':
|
||||
segs.replaceItem(path.createSVGPathSegLinetoVerticalAbs(y), i);
|
||||
break;
|
||||
case 'c':
|
||||
segs.replaceItem(
|
||||
path.createSVGPathSegCurvetoCubicAbs(x, y, x1, y1, x2, y2), i);
|
||||
break;
|
||||
case 's':
|
||||
segs.replaceItem(
|
||||
path.createSVGPathSegCurvetoCubicSmoothAbs(x, y, x2, y2), i);
|
||||
break;
|
||||
case 'q':
|
||||
segs.replaceItem(
|
||||
path.createSVGPathSegCurvetoQuadraticAbs(x, y, x1, y1), i);
|
||||
break;
|
||||
case 't':
|
||||
segs.replaceItem(
|
||||
path.createSVGPathSegCurvetoQuadraticSmoothAbs(x, y), i);
|
||||
break;
|
||||
case 'a':
|
||||
segs.replaceItem(
|
||||
path.createSVGPathSegArcAbs(x, y, seg.r1, seg.r2, seg.angle,
|
||||
seg.largeArcFlag, seg.sweepFlag), i);
|
||||
break;
|
||||
|
||||
case 'z': case 'Z':
|
||||
x = x0;
|
||||
y = y0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
// Record the start of a subpath
|
||||
if (c == 'M' || c == 'm') x0 = x, y0 = y;
|
||||
}
|
||||
}
|
||||
1
setup.py
1
setup.py
@@ -32,7 +32,6 @@ setup(
|
||||
'scripts/update-bbctrl',
|
||||
'scripts/upgrade-bbctrl',
|
||||
'scripts/sethostname',
|
||||
'scripts/reset-video',
|
||||
'scripts/config-wifi',
|
||||
'scripts/edit-config',
|
||||
'scripts/edit-boot-config',
|
||||
|
||||
@@ -1,207 +0,0 @@
|
||||
################################################################################
|
||||
# #
|
||||
# This file is part of the Buildbotics firmware. #
|
||||
# #
|
||||
# Copyright (c) 2015 - 2018, Buildbotics LLC #
|
||||
# All rights reserved. #
|
||||
# #
|
||||
# This file ("the software") is free software: you can redistribute it #
|
||||
# and/or modify it under the terms of the GNU General Public License, #
|
||||
# version 2 as published by the Free Software Foundation. You should #
|
||||
# have received a copy of the GNU General Public License, version 2 #
|
||||
# along with the software. If not, see <http://www.gnu.org/licenses/>. #
|
||||
# #
|
||||
# The software is distributed in the hope that it will be useful, but #
|
||||
# WITHOUT ANY WARRANTY; without even the implied warranty of #
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU #
|
||||
# Lesser General Public License for more details. #
|
||||
# #
|
||||
# You should have received a copy of the GNU Lesser General Public #
|
||||
# License along with the software. If not, see #
|
||||
# <http://www.gnu.org/licenses/>. #
|
||||
# #
|
||||
# For information regarding this software email: #
|
||||
# "Joseph Coffland" <joseph@buildbotics.com> #
|
||||
# #
|
||||
################################################################################
|
||||
|
||||
import os
|
||||
import sys
|
||||
import traceback
|
||||
import signal
|
||||
|
||||
import bbctrl
|
||||
import bbctrl.Cmd as Cmd
|
||||
|
||||
|
||||
class AVREmu(object):
|
||||
def __init__(self, ctrl):
|
||||
self.ctrl = ctrl
|
||||
self.log = ctrl.log.get('AVREmu')
|
||||
|
||||
self.avrOut = None
|
||||
self.avrIn = None
|
||||
self.i2cOut = None
|
||||
self.read_cb = None
|
||||
self.write_cb = None
|
||||
self.pid = None
|
||||
|
||||
|
||||
def close(self):
|
||||
# Close pipes
|
||||
def _close(fd, withHandle):
|
||||
if fd is None: return
|
||||
try:
|
||||
if withHandle: self.ctrl.ioloop.remove_handler(fd)
|
||||
except: pass
|
||||
try:
|
||||
os.close(fd)
|
||||
except: pass
|
||||
|
||||
_close(self.avrOut, True)
|
||||
_close(self.avrIn, True)
|
||||
_close(self.i2cOut, False)
|
||||
|
||||
self.avrOut, self.avrIn, self.i2cOut = None, None, None
|
||||
|
||||
# Kill process and wait for it
|
||||
if self.pid is not None:
|
||||
os.kill(self.pid, signal.SIGKILL)
|
||||
os.waitpid(self.pid, 0)
|
||||
self.pid = None
|
||||
|
||||
|
||||
def _start(self):
|
||||
try:
|
||||
self.close()
|
||||
|
||||
# Create pipes
|
||||
stdinFDs = os.pipe()
|
||||
stdoutFDs = os.pipe()
|
||||
i2cFDs = os.pipe()
|
||||
|
||||
self.pid = os.fork()
|
||||
|
||||
if not self.pid:
|
||||
# Dup child ends
|
||||
os.dup2(stdinFDs[0], 0)
|
||||
os.dup2(stdoutFDs[1], 1)
|
||||
os.dup2(i2cFDs[0], 3)
|
||||
|
||||
# Close orig fds
|
||||
os.close(stdinFDs[0])
|
||||
os.close(stdoutFDs[1])
|
||||
os.close(i2cFDs[0])
|
||||
|
||||
# Close parent ends
|
||||
os.close(stdinFDs[1])
|
||||
os.close(stdoutFDs[0])
|
||||
os.close(i2cFDs[1])
|
||||
|
||||
cmd = ['bbemu']
|
||||
if self.ctrl.args.fast_emu: cmd.append('--fast')
|
||||
|
||||
os.execvp(cmd[0], cmd)
|
||||
os._exit(1) # In case of failure
|
||||
|
||||
# Parent, close child ends
|
||||
os.close(stdinFDs[0])
|
||||
os.close(stdoutFDs[1])
|
||||
os.close(i2cFDs[0])
|
||||
|
||||
# Non-blocking IO
|
||||
os.set_blocking(stdinFDs[1], False)
|
||||
os.set_blocking(stdoutFDs[0], False)
|
||||
os.set_blocking(i2cFDs[1], False)
|
||||
|
||||
self.avrOut = stdinFDs[1]
|
||||
self.avrIn = stdoutFDs[0]
|
||||
self.i2cOut = i2cFDs[1]
|
||||
|
||||
ioloop = self.ctrl.ioloop
|
||||
ioloop.add_handler(self.avrOut, self._avr_write_handler,
|
||||
ioloop.WRITE | ioloop.ERROR)
|
||||
ioloop.add_handler(self.avrIn, self._avr_read_handler,
|
||||
ioloop.READ | ioloop.ERROR)
|
||||
|
||||
self.write_enabled = True
|
||||
|
||||
except Exception:
|
||||
self.close()
|
||||
self.log.exception('Internal error: Failed to start bbemu')
|
||||
|
||||
|
||||
def set_handlers(self, read_cb, write_cb):
|
||||
if self.read_cb is not None or self.write_cb is not None:
|
||||
raise Exception('AVR handler already set')
|
||||
|
||||
self.read_cb = read_cb
|
||||
self.write_cb = write_cb
|
||||
self._start()
|
||||
|
||||
|
||||
def enable_write(self, enable):
|
||||
if self.avrOut is None: return
|
||||
|
||||
flags = self.ctrl.ioloop.WRITE if enable else 0
|
||||
self.ctrl.ioloop.update_handler(self.avrOut, flags)
|
||||
self.write_enabled = enable
|
||||
|
||||
|
||||
def _avr_write(self, data):
|
||||
try:
|
||||
length = os.write(self.avrOut, data)
|
||||
self.continue_write = length and length == len(data)
|
||||
return length
|
||||
|
||||
except BlockingIOError: pass
|
||||
except BrokenPipeError: pass
|
||||
|
||||
return 0
|
||||
|
||||
|
||||
def _avr_write_handler(self, fd, events):
|
||||
if self.avrOut is None: return
|
||||
|
||||
if events & self.ctrl.ioloop.ERROR:
|
||||
self._start()
|
||||
return
|
||||
|
||||
try:
|
||||
while True:
|
||||
self.continue_write = False
|
||||
self.write_cb(self._avr_write)
|
||||
if not self.continue_write: break
|
||||
|
||||
except Exception as e:
|
||||
self.log.warning('AVR write handler error: %s',
|
||||
traceback.format_exc())
|
||||
|
||||
|
||||
def _avr_read_handler(self, fd, events):
|
||||
if self.avrIn is None: return
|
||||
|
||||
if events & self.ctrl.ioloop.ERROR:
|
||||
self._start()
|
||||
return
|
||||
|
||||
try:
|
||||
data = os.read(self.avrIn, 4096)
|
||||
if data is not None: self.read_cb(data)
|
||||
|
||||
except Exception as e:
|
||||
self.log.warning('AVR read handler error: %s %s' %
|
||||
(data, traceback.format_exc()))
|
||||
|
||||
|
||||
def i2c_command(self, cmd, byte = None, word = None, block = None):
|
||||
if byte is not None: data = chr(byte)
|
||||
elif word is not None: data = word
|
||||
elif block is not None: data = block
|
||||
else: data = ''
|
||||
|
||||
try:
|
||||
if self.i2cOut is not None:
|
||||
os.write(self.i2cOut, bytes(cmd + data + '\n', 'utf-8'))
|
||||
|
||||
except BrokenPipeError: pass
|
||||
@@ -25,10 +25,7 @@ class Ctrl(object):
|
||||
self.log.get('Ctrl').info('Starting %s' % self.id)
|
||||
|
||||
try:
|
||||
if args.demo:
|
||||
self.avr = bbctrl.AVREmu(self)
|
||||
else:
|
||||
self.avr = bbctrl.AVR(self)
|
||||
self.avr = bbctrl.AVR(self)
|
||||
|
||||
self.i2c = bbctrl.I2C(args.i2c_port, args.demo)
|
||||
self.mach = bbctrl.Mach(self, self.avr)
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -123,8 +123,6 @@ class State(object):
|
||||
|
||||
if not os.path.exists(upload):
|
||||
os.mkdir(upload)
|
||||
from shutil import copy
|
||||
copy(bbctrl.get_resource('http/buildbotics.nc'), upload)
|
||||
|
||||
for path in os.listdir(upload):
|
||||
if os.path.isfile(upload + '/' + path):
|
||||
|
||||
@@ -1,33 +1,5 @@
|
||||
#!/usr/bin/env python3
|
||||
|
||||
################################################################################
|
||||
# #
|
||||
# This file is part of the Buildbotics firmware. #
|
||||
# #
|
||||
# Copyright (c) 2015 - 2018, Buildbotics LLC #
|
||||
# All rights reserved. #
|
||||
# #
|
||||
# This file ("the software") is free software: you can redistribute it #
|
||||
# and/or modify it under the terms of the GNU General Public License, #
|
||||
# version 2 as published by the Free Software Foundation. You should #
|
||||
# have received a copy of the GNU General Public License, version 2 #
|
||||
# along with the software. If not, see <http://www.gnu.org/licenses/>. #
|
||||
# #
|
||||
# The software is distributed in the hope that it will be useful, but #
|
||||
# WITHOUT ANY WARRANTY; without even the implied warranty of #
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU #
|
||||
# Lesser General Public License for more details. #
|
||||
# #
|
||||
# You should have received a copy of the GNU Lesser General Public #
|
||||
# License along with the software. If not, see #
|
||||
# <http://www.gnu.org/licenses/>. #
|
||||
# #
|
||||
# For information regarding this software email: #
|
||||
# "Joseph Coffland" <joseph@buildbotics.com> #
|
||||
# #
|
||||
################################################################################
|
||||
|
||||
import os
|
||||
import sys
|
||||
import signal
|
||||
import tornado
|
||||
@@ -53,13 +25,11 @@ from bbctrl.Comm import Comm
|
||||
from bbctrl.CommandQueue import CommandQueue
|
||||
from bbctrl.Camera import Camera, VideoHandler
|
||||
from bbctrl.AVR import AVR
|
||||
from bbctrl.AVREmu import AVREmu
|
||||
from bbctrl.IOLoop import IOLoop
|
||||
from bbctrl.MonitorTemp import MonitorTemp
|
||||
import bbctrl.Cmd as Cmd
|
||||
import bbctrl.v4l2 as v4l2
|
||||
import bbctrl.Log as log
|
||||
import bbctrl.ObjGraph as ObjGraph
|
||||
|
||||
|
||||
ctrl = None
|
||||
@@ -69,7 +39,7 @@ def get_resource(path):
|
||||
return resource_filename(Requirement.parse('bbctrl'), 'bbctrl/' + path)
|
||||
|
||||
|
||||
def on_exit(sig = 0, func = None):
|
||||
def on_exit(sig=0, func=None):
|
||||
global ctrl
|
||||
|
||||
print('Exit handler triggered: signal = %d', sig)
|
||||
@@ -85,76 +55,46 @@ def time_str():
|
||||
return datetime.datetime.now().strftime('%Y%m%d-%H:%M:%S')
|
||||
|
||||
|
||||
|
||||
class Debugger:
|
||||
def __init__(self, ioloop, freq = 60 * 15, depth = 100):
|
||||
self.ioloop = ioloop
|
||||
self.freq = freq
|
||||
self.depth = depth
|
||||
self._callback()
|
||||
|
||||
|
||||
def _callback(self):
|
||||
with open('bbctrl-debug-%s.log' % time_str(), 'w') as log:
|
||||
def line(name):
|
||||
log.write('==== ' + name + ' ' + '=' * (74 - len(name)) + '\n')
|
||||
|
||||
line('Common')
|
||||
ObjGraph.show_most_common_types(limit = self.depth, file = log)
|
||||
|
||||
log.write('\n')
|
||||
line('Growth')
|
||||
ObjGraph.show_growth(limit = self.depth, file = log)
|
||||
|
||||
log.write('\n')
|
||||
line('New IDs')
|
||||
ObjGraph.get_new_ids(limit = self.depth, file = log)
|
||||
|
||||
log.flush()
|
||||
self.ioloop.call_later(self.freq, self._callback)
|
||||
|
||||
|
||||
|
||||
def parse_args():
|
||||
parser = argparse.ArgumentParser(
|
||||
description = 'Buildbotics Machine Controller')
|
||||
description='Buildbotics Machine Controller')
|
||||
|
||||
parser.add_argument('-p', '--port', default = 80,
|
||||
type = int, help = 'HTTP port')
|
||||
parser.add_argument('-a', '--addr', metavar = 'IP', default = '0.0.0.0',
|
||||
help = 'HTTP address to bind')
|
||||
parser.add_argument('-s', '--serial', default = '/dev/ttyAMA0',
|
||||
help = 'Serial device')
|
||||
parser.add_argument('-b', '--baud', default = 230400, type = int,
|
||||
help = 'Serial baud rate')
|
||||
parser.add_argument('--i2c-port', default = 1, type = int,
|
||||
help = 'I2C port')
|
||||
parser.add_argument('--avr-addr', default = 0x2b, type = int,
|
||||
help = 'AVR I2C address')
|
||||
parser.add_argument('--pwr-addr', default = 0x60, type = int,
|
||||
help = 'Power AVR I2C address')
|
||||
parser.add_argument('-v', '--verbose', action = 'store_true',
|
||||
help = 'Verbose output')
|
||||
parser.add_argument('-l', '--log', metavar = "FILE",
|
||||
help = 'Set a log file')
|
||||
parser.add_argument('--disable-camera', action = 'store_true',
|
||||
help = 'Disable the camera')
|
||||
parser.add_argument('--width', default = 640, type = int,
|
||||
help = 'Camera width')
|
||||
parser.add_argument('--height', default = 480, type = int,
|
||||
help = 'Camera height')
|
||||
parser.add_argument('--fps', default = 15, type = int,
|
||||
help = 'Camera frames per second')
|
||||
parser.add_argument('--camera-clients', default = 4,
|
||||
help = 'Maximum simultaneous camera clients')
|
||||
parser.add_argument('--demo', action = 'store_true',
|
||||
help = 'Enter demo mode')
|
||||
parser.add_argument('--debug', default = 0, type = int,
|
||||
help = 'Enable debug mode and set frequency in seconds')
|
||||
parser.add_argument('--fast-emu', action = 'store_true',
|
||||
help = 'Enter demo mode')
|
||||
parser.add_argument('--client-timeout', default = 5 * 60, type = int,
|
||||
help = 'Demo client timeout in seconds')
|
||||
parser.add_argument('-p', '--port', default=80,
|
||||
type=int, help='HTTP port')
|
||||
parser.add_argument('-a', '--addr', metavar='IP', default='0.0.0.0',
|
||||
help='HTTP address to bind')
|
||||
parser.add_argument('-s', '--serial', default='/dev/ttyAMA0',
|
||||
help='Serial device')
|
||||
parser.add_argument('-b', '--baud', default=230400, type=int,
|
||||
help='Serial baud rate')
|
||||
parser.add_argument('--i2c-port', default=1, type=int,
|
||||
help='I2C port')
|
||||
parser.add_argument('--avr-addr', default=0x2b, type=int,
|
||||
help='AVR I2C address')
|
||||
parser.add_argument('--pwr-addr', default=0x60, type=int,
|
||||
help='Power AVR I2C address')
|
||||
parser.add_argument('-v', '--verbose', action='store_true',
|
||||
help='Verbose output')
|
||||
parser.add_argument('-l', '--log', metavar="FILE",
|
||||
help='Set a log file')
|
||||
parser.add_argument('--disable-camera', action='store_true',
|
||||
help='Disable the camera')
|
||||
parser.add_argument('--width', default=640, type=int,
|
||||
help='Camera width')
|
||||
parser.add_argument('--height', default=480, type=int,
|
||||
help='Camera height')
|
||||
parser.add_argument('--fps', default=15, type=int,
|
||||
help='Camera frames per second')
|
||||
parser.add_argument('--camera-clients', default=4,
|
||||
help='Maximum simultaneous camera clients')
|
||||
parser.add_argument('--demo', action='store_true',
|
||||
help='Enter demo mode')
|
||||
parser.add_argument('--debug', default=0, type=int,
|
||||
help='Enable debug mode and set frequency in seconds')
|
||||
parser.add_argument('--fast-emu', action='store_true',
|
||||
help='Enter demo mode')
|
||||
parser.add_argument('--client-timeout', default=5 * 60, type=int,
|
||||
help='Demo client timeout in seconds')
|
||||
|
||||
return parser.parse_args()
|
||||
|
||||
@@ -170,16 +110,15 @@ def run():
|
||||
# Create ioloop
|
||||
ioloop = tornado.ioloop.IOLoop.current()
|
||||
|
||||
# Set ObjGraph signal handler
|
||||
if args.debug: Debugger(ioloop, args.debug)
|
||||
|
||||
# Start server
|
||||
web = Web(args, ioloop)
|
||||
|
||||
try:
|
||||
ioloop.start()
|
||||
|
||||
except KeyboardInterrupt: on_exit()
|
||||
except KeyboardInterrupt:
|
||||
on_exit()
|
||||
|
||||
|
||||
if __name__ == '__main__': run()
|
||||
if __name__ == '__main__':
|
||||
run()
|
||||
|
||||
@@ -1,403 +0,0 @@
|
||||
G21
|
||||
(File: 'buildbotics_logo.tpl')
|
||||
G0 Z3
|
||||
F1600
|
||||
M3 S10000
|
||||
M6 T2
|
||||
G0 X59.25 Y5.85
|
||||
G1 Z-1.5
|
||||
G1 X61.68 Y6.7
|
||||
G1 X63.86 Y8.07
|
||||
G1 X65.68 Y9.89
|
||||
G1 X67.05 Y12.07
|
||||
G1 X67.9 Y14.5
|
||||
G1 X68.2 Y17.09
|
||||
G1 Y56.6
|
||||
G1 X67.73 Y59.04
|
||||
G1 X50.8
|
||||
G1 Y34.9
|
||||
G1 X50.65 Y34.55
|
||||
G1 X50.3 Y34.4
|
||||
G1 X23.46
|
||||
G1 X23.1 Y34.55
|
||||
G1 X22.96 Y34.9
|
||||
G1 X22.98 Y49.88
|
||||
G1 X22.96 Y59.05
|
||||
G1 X22.41
|
||||
G1 X19.26
|
||||
G1 X6.04
|
||||
G1 X5.56 Y56.53
|
||||
G1 Y17.09
|
||||
G1 X5.85 Y14.5
|
||||
G1 X6.7 Y12.07
|
||||
G1 X8.07 Y9.89
|
||||
G1 X9.89 Y8.07
|
||||
G1 X12.07 Y6.7
|
||||
G1 X14.5 Y5.85
|
||||
G1 X17.09 Y5.56
|
||||
G1 X56.67
|
||||
G1 X59.25 Y5.85
|
||||
G0 Z3
|
||||
G0 X64.26 Y64.72
|
||||
G1 Z-1.5
|
||||
G1 X61.78 Y66.52
|
||||
G1 X58.91 Y67.68
|
||||
G1 X56.54 Y68.08
|
||||
G1 X17.22
|
||||
G1 X14.84 Y67.68
|
||||
G1 X11.97 Y66.52
|
||||
G1 X9.49 Y64.72
|
||||
G1 X8.08 Y63.16
|
||||
G1 X27.35
|
||||
G1 X27.89 Y63.45
|
||||
G1 X27.96 Y63.48
|
||||
G1 X31.48 Y64.75
|
||||
G1 X31.52 Y64.76
|
||||
G1 X31.56 Y64.77
|
||||
G1 X35.19 Y65.41
|
||||
G1 X35.26
|
||||
G1 X35.97 Y65.44
|
||||
G1 X36.04 Y65.45
|
||||
G1 X36.07
|
||||
G1 X36.82 Y65.44
|
||||
G1 X36.83
|
||||
G1 X36.89
|
||||
G1 X36.95
|
||||
G1 X36.97
|
||||
G1 X37.72 Y65.43
|
||||
G1 X37.74
|
||||
G1 X37.8
|
||||
G1 X37.81
|
||||
G1 X37.88
|
||||
G1 X37.89
|
||||
G1 X38.65 Y65.38
|
||||
G1 X38.68
|
||||
G1 X38.75 Y65.37
|
||||
G1 X39.38 Y65.32
|
||||
G1 X39.44 Y65.31
|
||||
G1 X42.68 Y64.64
|
||||
G1 X42.76 Y64.62
|
||||
G1 X45.87 Y63.44
|
||||
G1 X45.93 Y63.41
|
||||
G1 X46.4 Y63.16
|
||||
G1 X65.67
|
||||
G1 X64.26 Y64.72
|
||||
G0 Z3
|
||||
G0 X36.88 Y9.4
|
||||
G1 Z-1.5
|
||||
G1 X37.31 Y9.64
|
||||
G1 X39.58 Y13.48
|
||||
G1 X39.63 Y13.6
|
||||
G1 X39.65 Y13.73
|
||||
G1 Y27.54
|
||||
G1 X41.67
|
||||
G1 Y25.39
|
||||
G1 X41.75 Y25.12
|
||||
G1 X41.97 Y24.93
|
||||
G1 X46.41 Y22.92
|
||||
G1 Y19.97
|
||||
G1 X45.44
|
||||
G1 X45.08 Y19.82
|
||||
G1 X44.94 Y19.47
|
||||
G1 Y13.73
|
||||
G1 X45.08 Y13.38
|
||||
G1 X45.44 Y13.23
|
||||
G1 X49.94 Y13.24
|
||||
G1 X50.29 Y13.39
|
||||
G1 X50.44 Y13.74
|
||||
G1 Y19.47
|
||||
G1 X50.29 Y19.83
|
||||
G1 X49.93 Y19.97
|
||||
G1 X48.92
|
||||
G1 Y23.61
|
||||
G1 X48.84 Y23.88
|
||||
G1 X48.63 Y24.06
|
||||
G1 X44.19 Y26.12
|
||||
G1 Y27.54
|
||||
G1 X49.22
|
||||
G1 X49.33 Y27.56
|
||||
G1 X49.44 Y27.6
|
||||
G1 X50.13 Y27.94
|
||||
G1 X50.25 Y28.02
|
||||
G1 X50.34 Y28.13
|
||||
G1 X50.73 Y28.77
|
||||
G1 X50.78 Y28.89
|
||||
G1 X50.8 Y29.03
|
||||
G1 Y33.05
|
||||
G1 Y34.25
|
||||
G1 Y34.65
|
||||
G1 X50.66 Y35.01
|
||||
G1 X50.3 Y35.15
|
||||
G1 X23.46
|
||||
G1 X23.1 Y35.01
|
||||
G1 X22.96 Y34.65
|
||||
G1 Y29.07
|
||||
G1 X22.97 Y28.94
|
||||
G1 X23.02 Y28.82
|
||||
G1 X23.4 Y28.17
|
||||
G1 X23.49 Y28.06
|
||||
G1 X23.6 Y27.98
|
||||
G1 X24.29 Y27.6
|
||||
G1 X24.4 Y27.56
|
||||
G1 X24.52 Y27.54
|
||||
G1 X25.55
|
||||
G1 Y26.4
|
||||
G1 X23.4 Y25.52
|
||||
G1 X23.17 Y25.33
|
||||
G1 X23.09 Y25.06
|
||||
G1 Y17.54
|
||||
G1 X23.23 Y17.19
|
||||
G1 X23.59 Y17.04
|
||||
G1 X24.6
|
||||
G1 Y10.36
|
||||
G1 X24.62 Y10.23
|
||||
G1 X24.66 Y10.11
|
||||
G1 X24.8 Y9.88
|
||||
G1 X24.88 Y9.77
|
||||
G1 X24.99 Y9.68
|
||||
G1 X25.25 Y9.54
|
||||
G1 X25.37 Y9.5
|
||||
G1 X25.49 Y9.48
|
||||
G1 X26.53
|
||||
G1 X26.65 Y9.49
|
||||
G1 X26.76 Y9.54
|
||||
G1 X27.01 Y9.66
|
||||
G1 X27.12 Y9.74
|
||||
G1 X27.21 Y9.85
|
||||
G1 X27.35 Y10.09
|
||||
G1 X27.41 Y10.22
|
||||
G1 X27.43 Y10.35
|
||||
G1 Y10.43
|
||||
G1 X27.47 Y17.04
|
||||
G1 X28.57
|
||||
G1 X28.92 Y17.19
|
||||
G1 X29.07 Y17.54
|
||||
G1 Y24.64
|
||||
G1 X30.72 Y25.3
|
||||
G1 X30.95 Y25.49
|
||||
G1 X31.03 Y25.77
|
||||
G1 X31.02 Y27.54
|
||||
G1 X34.03
|
||||
G1 Y13.73
|
||||
G1 X34.05 Y13.59
|
||||
G1 X34.1 Y13.47
|
||||
G1 X36.45 Y9.64
|
||||
G1 X36.88 Y9.4
|
||||
G0 Z3
|
||||
G0 X49.94 Y10.82
|
||||
G1 Z-1.5
|
||||
G1 X50.29 Y10.97
|
||||
G1 X50.44 Y11.32
|
||||
G1 Y13.34
|
||||
G1 X50.29 Y13.69
|
||||
G1 X49.94 Y13.84
|
||||
G1 X45.44
|
||||
G1 X45.08 Y13.69
|
||||
G1 X44.94 Y13.34
|
||||
G1 Y11.32
|
||||
G1 X45.08 Y10.97
|
||||
G1 X45.44 Y10.82
|
||||
G1 X49.94
|
||||
G0 Z3
|
||||
G0 X48.46 Y9.7
|
||||
G1 Z-1.5
|
||||
G1 X48.59 Y9.72
|
||||
G1 X48.71 Y9.77
|
||||
G1 X50.03 Y10.53
|
||||
G1 X50.21 Y10.71
|
||||
G1 X50.28 Y10.96
|
||||
G1 X50.14 Y11.31
|
||||
G1 X49.78 Y11.46
|
||||
G1 X45.62
|
||||
G1 X45.14 Y11.09
|
||||
G1 X45.37 Y10.53
|
||||
G1 X46.69 Y9.77
|
||||
G1 X46.81 Y9.72
|
||||
G1 X46.94 Y9.7
|
||||
G1 X48.46
|
||||
G0 Z3
|
||||
G0 X50.3 Y34.4
|
||||
G1 Z-1.5
|
||||
G1 X50.66 Y34.55
|
||||
G1 X50.8 Y34.9
|
||||
G1 Y49.88
|
||||
G1 X50.79 Y59.52
|
||||
G1 X50.76 Y59.69
|
||||
G1 X50.67 Y59.84
|
||||
G1 X50.09 Y60.52
|
||||
G1 X50.06 Y60.55
|
||||
G1 X50.02 Y60.58
|
||||
G1 X47.89 Y62.26
|
||||
G1 X47.85 Y62.28
|
||||
G1 X47.81 Y62.31
|
||||
G1 X44.46 Y64.03
|
||||
G1 X44.41 Y64.05
|
||||
G1 X44.37 Y64.06
|
||||
G1 X40.69 Y65.1
|
||||
G1 X40.62 Y65.12
|
||||
G1 X37.86 Y65.45
|
||||
G1 X37.8 Y65.46
|
||||
G1 X36.89 Y65.44
|
||||
G1 X36.83
|
||||
G1 X36.82
|
||||
G1 X36.07 Y65.45
|
||||
G1 X36.04 Y65.44
|
||||
G1 X35.97
|
||||
G1 X35.1 Y65.41
|
||||
G1 X35.04 Y65.4
|
||||
G1 X32.44 Y64.99
|
||||
G1 X32.37 Y64.97
|
||||
G1 X28.94 Y63.9
|
||||
G1 X28.89 Y63.88
|
||||
G1 X28.85 Y63.86
|
||||
G1 X25.74 Y62.2
|
||||
G1 X25.7 Y62.18
|
||||
G1 X25.66 Y62.15
|
||||
G1 X23.68 Y60.56
|
||||
G1 X23.65 Y60.53
|
||||
G1 X23.62 Y60.5
|
||||
G1 X23.08 Y59.87
|
||||
G1 X22.99 Y59.71
|
||||
G1 X22.96 Y59.54
|
||||
G1 X22.98 Y49.88
|
||||
G1 X22.96 Y34.9
|
||||
G1 X23.1 Y34.55
|
||||
G1 X23.46 Y34.4
|
||||
G1 X50.3
|
||||
G0 Z3
|
||||
G0 X55.2 Y43.67
|
||||
G1 Z-1.5
|
||||
G1 Y51.34
|
||||
G1 X55.11 Y51.94
|
||||
G1 X54.83 Y52.88
|
||||
G1 X54.39 Y53.88
|
||||
G1 X53.8 Y54.85
|
||||
G1 X53.09 Y55.74
|
||||
G1 X52.28 Y56.47
|
||||
G1 X51.41 Y56.98
|
||||
G1 X51.07 Y57.09
|
||||
G1 Y43.67
|
||||
G1 X55.2
|
||||
G0 Z3
|
||||
G0 X22.69 Y43.63
|
||||
G1 Z-1.5
|
||||
G1 Y57.09
|
||||
G1 X22.35 Y56.98
|
||||
G1 X21.47 Y56.47
|
||||
G1 X20.67 Y55.74
|
||||
G1 X19.95 Y54.85
|
||||
G1 X19.36 Y53.88
|
||||
G1 X18.92 Y52.88
|
||||
G1 X18.64 Y51.94
|
||||
G1 X18.55 Y51.34
|
||||
G1 Y43.63
|
||||
G1 X22.69
|
||||
G0 Z3
|
||||
G0 X28.55 Y35.84
|
||||
G1 Z-0.99
|
||||
G1 X30.11 Y36.15
|
||||
G1 X31.43 Y37.03
|
||||
G1 X32.32 Y38.35
|
||||
G1 X32.63 Y39.91
|
||||
G1 X32.32 Y41.47
|
||||
G1 X31.43 Y42.79
|
||||
G1 X30.11 Y43.68
|
||||
G1 X28.55 Y43.99
|
||||
G1 X26.99 Y43.68
|
||||
G1 X25.67 Y42.79
|
||||
G1 X24.79 Y41.47
|
||||
G1 X24.48 Y39.91
|
||||
G1 X24.79 Y38.35
|
||||
G1 X25.67 Y37.03
|
||||
G1 X26.99 Y36.15
|
||||
G1 X28.55 Y35.84
|
||||
G0 Z3
|
||||
G0 X45.33 Y35.93
|
||||
G1 Z-0.99
|
||||
G1 X46.88 Y36.24
|
||||
G1 X48.21 Y37.12
|
||||
G1 X49.09 Y38.45
|
||||
G1 X49.4 Y40
|
||||
G1 X49.09 Y41.56
|
||||
G1 X48.21 Y42.88
|
||||
G1 X46.88 Y43.77
|
||||
G1 X45.33 Y44.08
|
||||
G1 X43.77 Y43.77
|
||||
G1 X42.45 Y42.88
|
||||
G1 X41.56 Y41.56
|
||||
G1 X41.25 Y40
|
||||
G1 X41.56 Y38.45
|
||||
G1 X42.45 Y37.12
|
||||
G1 X43.77 Y36.24
|
||||
G1 X45.33 Y35.93
|
||||
G0 Z3
|
||||
G0 X45.2 Y39.12
|
||||
G1 Z-0.99
|
||||
G1 X45.7 Y39.19
|
||||
G1 X46.07 Y39.52
|
||||
G1 X46.22 Y40
|
||||
G1 X46.07 Y40.49
|
||||
G1 X45.7 Y40.81
|
||||
G1 X45.2 Y40.89
|
||||
G1 X44.74 Y40.68
|
||||
G1 X44.47 Y40.26
|
||||
G1 Y39.75
|
||||
G1 X44.74 Y39.33
|
||||
G1 X45.2 Y39.12
|
||||
G0 Z3
|
||||
G0 X28.43 Y39.03
|
||||
G1 Z-0.99
|
||||
G1 X28.92 Y39.1
|
||||
G1 X29.3 Y39.43
|
||||
G1 X29.44 Y39.91
|
||||
G1 X29.3 Y40.4
|
||||
G1 X28.92 Y40.72
|
||||
G1 X28.43 Y40.8
|
||||
G1 X27.97 Y40.59
|
||||
G1 X27.7 Y40.16
|
||||
G1 Y39.66
|
||||
G1 X27.97 Y39.24
|
||||
G1 X28.43 Y39.03
|
||||
G0 Z3
|
||||
G0 X55.76 Y0
|
||||
G1 Z-1.5
|
||||
G1 X59.27 Y0.35
|
||||
G1 X62.65 Y1.37
|
||||
G1 X65.76 Y3.03
|
||||
G1 X68.49 Y5.27
|
||||
G1 X70.73 Y8
|
||||
G1 X72.39 Y11.11
|
||||
G1 X73.42 Y14.49
|
||||
G1 X73.76 Y18
|
||||
G1 Y55.69
|
||||
G1 X73.42 Y59.2
|
||||
G1 X72.39 Y62.57
|
||||
G1 X70.73 Y65.69
|
||||
G1 X68.49 Y68.41
|
||||
G1 X65.76 Y70.65
|
||||
G1 X62.65 Y72.31
|
||||
G1 X59.27 Y73.34
|
||||
G1 X55.76 Y73.69
|
||||
G1 X18
|
||||
G1 X14.49 Y73.34
|
||||
G1 X11.11 Y72.31
|
||||
G1 X8 Y70.65
|
||||
G1 X5.27 Y68.41
|
||||
G1 X3.03 Y65.69
|
||||
G1 X1.37 Y62.57
|
||||
G1 X0.35 Y59.2
|
||||
G1 X0 Y55.69
|
||||
G1 Y18
|
||||
G1 X0.35 Y14.49
|
||||
G1 X1.37 Y11.11
|
||||
G1 X3.03 Y8
|
||||
G1 X5.27 Y5.27
|
||||
G1 X8 Y3.03
|
||||
G1 X11.11 Y1.37
|
||||
G1 X14.49 Y0.35
|
||||
G1 X18 Y0
|
||||
G1 X55.76
|
||||
G0 Z3
|
||||
M5
|
||||
G0 X40 Y75
|
||||
M2
|
||||
535
src/svelte-components/package-lock.json
generated
535
src/svelte-components/package-lock.json
generated
@@ -8,21 +8,21 @@
|
||||
"name": "svelte-components",
|
||||
"version": "0.0.0",
|
||||
"devDependencies": {
|
||||
"@sveltejs/kit": "^1.0.0-next.357",
|
||||
"@sveltejs/vite-plugin-svelte": "^1.0.0-next.49",
|
||||
"@sveltejs/kit": "^1.0.0-next.392",
|
||||
"@sveltejs/vite-plugin-svelte": "^1.0.1",
|
||||
"@tsconfig/svelte": "^3.0.0",
|
||||
"node-sass": "^7.0.1",
|
||||
"polyfill-object.fromentries": "^1.0.1",
|
||||
"smui-theme": "^6.0.0-beta.16",
|
||||
"string.prototype.matchall": "^4.0.7",
|
||||
"svelte": "^3.48.0",
|
||||
"svelte": "^3.49.0",
|
||||
"svelte-check": "^2.8.0",
|
||||
"svelte-material-ui": "^6.0.0-beta.16",
|
||||
"svelte-preprocess": "^4.10.7",
|
||||
"svelte-tiny-virtual-list": "^2.0.5",
|
||||
"tslib": "^2.4.0",
|
||||
"typescript": "^4.7.4",
|
||||
"vite": "^2.9.13"
|
||||
"vite": "^3.0.2"
|
||||
}
|
||||
},
|
||||
"node_modules/@babel/code-frame": {
|
||||
@@ -129,9 +129,9 @@
|
||||
"dev": true
|
||||
},
|
||||
"node_modules/@jridgewell/resolve-uri": {
|
||||
"version": "3.0.8",
|
||||
"resolved": "https://registry.npmjs.org/@jridgewell/resolve-uri/-/resolve-uri-3.0.8.tgz",
|
||||
"integrity": "sha512-YK5G9LaddzGbcucK4c8h5tWFmMPBvRZ/uyWmN1/SbBdIvqGUdWGkJ5BAaccgs6XbzVLsqbPJrBSFwKv3kT9i7w==",
|
||||
"version": "3.1.0",
|
||||
"resolved": "https://registry.npmjs.org/@jridgewell/resolve-uri/-/resolve-uri-3.1.0.tgz",
|
||||
"integrity": "sha512-F2msla3tad+Mfht5cJq7LSXcdudKTWCVYUgw6pLFOOHSTtZlj6SWNYAp+AhuqLmWdBO2X5hPrLcu8cVP8fy28w==",
|
||||
"dev": true,
|
||||
"engines": {
|
||||
"node": ">=6.0.0"
|
||||
@@ -1516,46 +1516,46 @@
|
||||
}
|
||||
},
|
||||
"node_modules/@sveltejs/kit": {
|
||||
"version": "1.0.0-next.357",
|
||||
"resolved": "https://registry.npmjs.org/@sveltejs/kit/-/kit-1.0.0-next.357.tgz",
|
||||
"integrity": "sha512-nCAehVybIEpQNnPu61V/EFVdfDb1nBSiQUfW9EcSSDEUbyAMCVBOKZZuzQ0qQDp3xniqRkyDzpBA4wN+ADxHBw==",
|
||||
"version": "1.0.0-next.392",
|
||||
"resolved": "https://registry.npmjs.org/@sveltejs/kit/-/kit-1.0.0-next.392.tgz",
|
||||
"integrity": "sha512-od4rDJ/Soq0I7mda7sTbAnNKERHSDEGNa7QBpLA859xgBkwC1JnEIymYOh9dm+hMyHhB0bUoRoaur0qxKLqOOw==",
|
||||
"dev": true,
|
||||
"dependencies": {
|
||||
"@sveltejs/vite-plugin-svelte": "^1.0.0-next.48",
|
||||
"@sveltejs/vite-plugin-svelte": "^1.0.1",
|
||||
"chokidar": "^3.5.3",
|
||||
"sade": "^1.8.1",
|
||||
"vite": "^2.9.10"
|
||||
"sade": "^1.8.1"
|
||||
},
|
||||
"bin": {
|
||||
"svelte-kit": "svelte-kit.js"
|
||||
},
|
||||
"engines": {
|
||||
"node": ">=16.7"
|
||||
"node": ">=16.9"
|
||||
},
|
||||
"peerDependencies": {
|
||||
"svelte": "^3.44.0"
|
||||
"svelte": "^3.44.0",
|
||||
"vite": "^3.0.0"
|
||||
}
|
||||
},
|
||||
"node_modules/@sveltejs/vite-plugin-svelte": {
|
||||
"version": "1.0.0-next.49",
|
||||
"resolved": "https://registry.npmjs.org/@sveltejs/vite-plugin-svelte/-/vite-plugin-svelte-1.0.0-next.49.tgz",
|
||||
"integrity": "sha512-AKh0Ka8EDgidnxWUs8Hh2iZLZovkETkefO99XxZ4sW4WGJ7VFeBx5kH/NIIGlaNHLcrIvK3CK0HkZwC3Cici0A==",
|
||||
"version": "1.0.1",
|
||||
"resolved": "https://registry.npmjs.org/@sveltejs/vite-plugin-svelte/-/vite-plugin-svelte-1.0.1.tgz",
|
||||
"integrity": "sha512-PorCgUounn0VXcpeJu+hOweZODKmGuLHsLomwqSj+p26IwjjGffmYQfVHtiTWq+NqaUuuHWWG7vPge6UFw4Aeg==",
|
||||
"dev": true,
|
||||
"dependencies": {
|
||||
"@rollup/pluginutils": "^4.2.1",
|
||||
"debug": "^4.3.4",
|
||||
"deepmerge": "^4.2.2",
|
||||
"kleur": "^4.1.4",
|
||||
"kleur": "^4.1.5",
|
||||
"magic-string": "^0.26.2",
|
||||
"svelte-hmr": "^0.14.12"
|
||||
},
|
||||
"engines": {
|
||||
"node": "^14.13.1 || >= 16"
|
||||
"node": "^14.18.0 || >= 16"
|
||||
},
|
||||
"peerDependencies": {
|
||||
"diff-match-patch": "^1.0.5",
|
||||
"svelte": "^3.44.0",
|
||||
"vite": "^2.9.0"
|
||||
"vite": "^3.0.0"
|
||||
},
|
||||
"peerDependenciesMeta": {
|
||||
"diff-match-patch": {
|
||||
@@ -1585,9 +1585,9 @@
|
||||
"dev": true
|
||||
},
|
||||
"node_modules/@types/node": {
|
||||
"version": "18.0.1",
|
||||
"resolved": "https://registry.npmjs.org/@types/node/-/node-18.0.1.tgz",
|
||||
"integrity": "sha512-CmR8+Tsy95hhwtZBKJBs0/FFq4XX7sDZHlGGf+0q+BRZfMbOTkzkj0AFAuTyXbObDIoanaBBW0+KEW+m3N16Wg==",
|
||||
"version": "18.0.6",
|
||||
"resolved": "https://registry.npmjs.org/@types/node/-/node-18.0.6.tgz",
|
||||
"integrity": "sha512-/xUq6H2aQm261exT6iZTMifUySEt4GR5KX8eYyY+C4MSNPqSh9oNIP7tz2GLKTlFaiBbgZNxffoR3CVRG+cljw==",
|
||||
"dev": true
|
||||
},
|
||||
"node_modules/@types/normalize-package-data": {
|
||||
@@ -2301,9 +2301,9 @@
|
||||
"dev": true
|
||||
},
|
||||
"node_modules/esbuild": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild/-/esbuild-0.14.48.tgz",
|
||||
"integrity": "sha512-w6N1Yn5MtqK2U1/WZTX9ZqUVb8IOLZkZ5AdHkT6x3cHDMVsYWC7WPdiLmx19w3i4Rwzy5LqsEMtVihG3e4rFzA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild/-/esbuild-0.14.49.tgz",
|
||||
"integrity": "sha512-/TlVHhOaq7Yz8N1OJrjqM3Auzo5wjvHFLk+T8pIue+fhnhIMpfAzsG6PLVMbFveVxqD2WOp3QHei+52IMUNmCw==",
|
||||
"dev": true,
|
||||
"hasInstallScript": true,
|
||||
"bin": {
|
||||
@@ -2313,32 +2313,32 @@
|
||||
"node": ">=12"
|
||||
},
|
||||
"optionalDependencies": {
|
||||
"esbuild-android-64": "0.14.48",
|
||||
"esbuild-android-arm64": "0.14.48",
|
||||
"esbuild-darwin-64": "0.14.48",
|
||||
"esbuild-darwin-arm64": "0.14.48",
|
||||
"esbuild-freebsd-64": "0.14.48",
|
||||
"esbuild-freebsd-arm64": "0.14.48",
|
||||
"esbuild-linux-32": "0.14.48",
|
||||
"esbuild-linux-64": "0.14.48",
|
||||
"esbuild-linux-arm": "0.14.48",
|
||||
"esbuild-linux-arm64": "0.14.48",
|
||||
"esbuild-linux-mips64le": "0.14.48",
|
||||
"esbuild-linux-ppc64le": "0.14.48",
|
||||
"esbuild-linux-riscv64": "0.14.48",
|
||||
"esbuild-linux-s390x": "0.14.48",
|
||||
"esbuild-netbsd-64": "0.14.48",
|
||||
"esbuild-openbsd-64": "0.14.48",
|
||||
"esbuild-sunos-64": "0.14.48",
|
||||
"esbuild-windows-32": "0.14.48",
|
||||
"esbuild-windows-64": "0.14.48",
|
||||
"esbuild-windows-arm64": "0.14.48"
|
||||
"esbuild-android-64": "0.14.49",
|
||||
"esbuild-android-arm64": "0.14.49",
|
||||
"esbuild-darwin-64": "0.14.49",
|
||||
"esbuild-darwin-arm64": "0.14.49",
|
||||
"esbuild-freebsd-64": "0.14.49",
|
||||
"esbuild-freebsd-arm64": "0.14.49",
|
||||
"esbuild-linux-32": "0.14.49",
|
||||
"esbuild-linux-64": "0.14.49",
|
||||
"esbuild-linux-arm": "0.14.49",
|
||||
"esbuild-linux-arm64": "0.14.49",
|
||||
"esbuild-linux-mips64le": "0.14.49",
|
||||
"esbuild-linux-ppc64le": "0.14.49",
|
||||
"esbuild-linux-riscv64": "0.14.49",
|
||||
"esbuild-linux-s390x": "0.14.49",
|
||||
"esbuild-netbsd-64": "0.14.49",
|
||||
"esbuild-openbsd-64": "0.14.49",
|
||||
"esbuild-sunos-64": "0.14.49",
|
||||
"esbuild-windows-32": "0.14.49",
|
||||
"esbuild-windows-64": "0.14.49",
|
||||
"esbuild-windows-arm64": "0.14.49"
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-android-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-android-64/-/esbuild-android-64-0.14.48.tgz",
|
||||
"integrity": "sha512-3aMjboap/kqwCUpGWIjsk20TtxVoKck8/4Tu19rubh7t5Ra0Yrpg30Mt1QXXlipOazrEceGeWurXKeFJgkPOUg==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-android-64/-/esbuild-android-64-0.14.49.tgz",
|
||||
"integrity": "sha512-vYsdOTD+yi+kquhBiFWl3tyxnj2qZJsl4tAqwhT90ktUdnyTizgle7TjNx6Ar1bN7wcwWqZ9QInfdk2WVagSww==",
|
||||
"cpu": [
|
||||
"x64"
|
||||
],
|
||||
@@ -2352,9 +2352,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-android-arm64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-android-arm64/-/esbuild-android-arm64-0.14.48.tgz",
|
||||
"integrity": "sha512-vptI3K0wGALiDq+EvRuZotZrJqkYkN5282iAfcffjI5lmGG9G1ta/CIVauhY42MBXwEgDJkweiDcDMRLzBZC4g==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-android-arm64/-/esbuild-android-arm64-0.14.49.tgz",
|
||||
"integrity": "sha512-g2HGr/hjOXCgSsvQZ1nK4nW/ei8JUx04Li74qub9qWrStlysaVmadRyTVuW32FGIpLQyc5sUjjZopj49eGGM2g==",
|
||||
"cpu": [
|
||||
"arm64"
|
||||
],
|
||||
@@ -2368,9 +2368,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-darwin-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-darwin-64/-/esbuild-darwin-64-0.14.48.tgz",
|
||||
"integrity": "sha512-gGQZa4+hab2Va/Zww94YbshLuWteyKGD3+EsVon8EWTWhnHFRm5N9NbALNbwi/7hQ/hM1Zm4FuHg+k6BLsl5UA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-darwin-64/-/esbuild-darwin-64-0.14.49.tgz",
|
||||
"integrity": "sha512-3rvqnBCtX9ywso5fCHixt2GBCUsogNp9DjGmvbBohh31Ces34BVzFltMSxJpacNki96+WIcX5s/vum+ckXiLYg==",
|
||||
"cpu": [
|
||||
"x64"
|
||||
],
|
||||
@@ -2384,9 +2384,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-darwin-arm64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-darwin-arm64/-/esbuild-darwin-arm64-0.14.48.tgz",
|
||||
"integrity": "sha512-bFjnNEXjhZT+IZ8RvRGNJthLWNHV5JkCtuOFOnjvo5pC0sk2/QVk0Qc06g2PV3J0TcU6kaPC3RN9yy9w2PSLEA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-darwin-arm64/-/esbuild-darwin-arm64-0.14.49.tgz",
|
||||
"integrity": "sha512-XMaqDxO846srnGlUSJnwbijV29MTKUATmOLyQSfswbK/2X5Uv28M9tTLUJcKKxzoo9lnkYPsx2o8EJcTYwCs/A==",
|
||||
"cpu": [
|
||||
"arm64"
|
||||
],
|
||||
@@ -2400,9 +2400,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-freebsd-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-freebsd-64/-/esbuild-freebsd-64-0.14.48.tgz",
|
||||
"integrity": "sha512-1NOlwRxmOsnPcWOGTB10JKAkYSb2nue0oM1AfHWunW/mv3wERfJmnYlGzL3UAOIUXZqW8GeA2mv+QGwq7DToqA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-freebsd-64/-/esbuild-freebsd-64-0.14.49.tgz",
|
||||
"integrity": "sha512-NJ5Q6AjV879mOHFri+5lZLTp5XsO2hQ+KSJYLbfY9DgCu8s6/Zl2prWXVANYTeCDLlrIlNNYw8y34xqyLDKOmQ==",
|
||||
"cpu": [
|
||||
"x64"
|
||||
],
|
||||
@@ -2416,9 +2416,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-freebsd-arm64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-freebsd-arm64/-/esbuild-freebsd-arm64-0.14.48.tgz",
|
||||
"integrity": "sha512-gXqKdO8wabVcYtluAbikDH2jhXp+Klq5oCD5qbVyUG6tFiGhrC9oczKq3vIrrtwcxDQqK6+HDYK8Zrd4bCA9Gw==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-freebsd-arm64/-/esbuild-freebsd-arm64-0.14.49.tgz",
|
||||
"integrity": "sha512-lFLtgXnAc3eXYqj5koPlBZvEbBSOSUbWO3gyY/0+4lBdRqELyz4bAuamHvmvHW5swJYL7kngzIZw6kdu25KGOA==",
|
||||
"cpu": [
|
||||
"arm64"
|
||||
],
|
||||
@@ -2432,9 +2432,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-linux-32": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-32/-/esbuild-linux-32-0.14.48.tgz",
|
||||
"integrity": "sha512-ghGyDfS289z/LReZQUuuKq9KlTiTspxL8SITBFQFAFRA/IkIvDpnZnCAKTCjGXAmUqroMQfKJXMxyjJA69c/nQ==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-32/-/esbuild-linux-32-0.14.49.tgz",
|
||||
"integrity": "sha512-zTTH4gr2Kb8u4QcOpTDVn7Z8q7QEIvFl/+vHrI3cF6XOJS7iEI1FWslTo3uofB2+mn6sIJEQD9PrNZKoAAMDiA==",
|
||||
"cpu": [
|
||||
"ia32"
|
||||
],
|
||||
@@ -2448,9 +2448,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-linux-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-64/-/esbuild-linux-64-0.14.48.tgz",
|
||||
"integrity": "sha512-vni3p/gppLMVZLghI7oMqbOZdGmLbbKR23XFARKnszCIBpEMEDxOMNIKPmMItQrmH/iJrL1z8Jt2nynY0bE1ug==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-64/-/esbuild-linux-64-0.14.49.tgz",
|
||||
"integrity": "sha512-hYmzRIDzFfLrB5c1SknkxzM8LdEUOusp6M2TnuQZJLRtxTgyPnZZVtyMeCLki0wKgYPXkFsAVhi8vzo2mBNeTg==",
|
||||
"cpu": [
|
||||
"x64"
|
||||
],
|
||||
@@ -2464,9 +2464,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-linux-arm": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-arm/-/esbuild-linux-arm-0.14.48.tgz",
|
||||
"integrity": "sha512-+VfSV7Akh1XUiDNXgqgY1cUP1i2vjI+BmlyXRfVz5AfV3jbpde8JTs5Q9sYgaoq5cWfuKfoZB/QkGOI+QcL1Tw==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-arm/-/esbuild-linux-arm-0.14.49.tgz",
|
||||
"integrity": "sha512-iE3e+ZVv1Qz1Sy0gifIsarJMQ89Rpm9mtLSRtG3AH0FPgAzQ5Z5oU6vYzhc/3gSPi2UxdCOfRhw2onXuFw/0lg==",
|
||||
"cpu": [
|
||||
"arm"
|
||||
],
|
||||
@@ -2480,9 +2480,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-linux-arm64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-arm64/-/esbuild-linux-arm64-0.14.48.tgz",
|
||||
"integrity": "sha512-3CFsOlpoxlKPRevEHq8aAntgYGYkE1N9yRYAcPyng/p4Wyx0tPR5SBYsxLKcgPB9mR8chHEhtWYz6EZ+H199Zw==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-arm64/-/esbuild-linux-arm64-0.14.49.tgz",
|
||||
"integrity": "sha512-KLQ+WpeuY+7bxukxLz5VgkAAVQxUv67Ft4DmHIPIW+2w3ObBPQhqNoeQUHxopoW/aiOn3m99NSmSV+bs4BSsdA==",
|
||||
"cpu": [
|
||||
"arm64"
|
||||
],
|
||||
@@ -2496,9 +2496,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-linux-mips64le": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-mips64le/-/esbuild-linux-mips64le-0.14.48.tgz",
|
||||
"integrity": "sha512-cs0uOiRlPp6ymknDnjajCgvDMSsLw5mST2UXh+ZIrXTj2Ifyf2aAP3Iw4DiqgnyYLV2O/v/yWBJx+WfmKEpNLA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-mips64le/-/esbuild-linux-mips64le-0.14.49.tgz",
|
||||
"integrity": "sha512-n+rGODfm8RSum5pFIqFQVQpYBw+AztL8s6o9kfx7tjfK0yIGF6tm5HlG6aRjodiiKkH2xAiIM+U4xtQVZYU4rA==",
|
||||
"cpu": [
|
||||
"mips64el"
|
||||
],
|
||||
@@ -2512,9 +2512,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-linux-ppc64le": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-ppc64le/-/esbuild-linux-ppc64le-0.14.48.tgz",
|
||||
"integrity": "sha512-+2F0vJMkuI0Wie/wcSPDCqXvSFEELH7Jubxb7mpWrA/4NpT+/byjxDz0gG6R1WJoeDefcrMfpBx4GFNN1JQorQ==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-ppc64le/-/esbuild-linux-ppc64le-0.14.49.tgz",
|
||||
"integrity": "sha512-WP9zR4HX6iCBmMFH+XHHng2LmdoIeUmBpL4aL2TR8ruzXyT4dWrJ5BSbT8iNo6THN8lod6GOmYDLq/dgZLalGw==",
|
||||
"cpu": [
|
||||
"ppc64"
|
||||
],
|
||||
@@ -2528,9 +2528,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-linux-riscv64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-riscv64/-/esbuild-linux-riscv64-0.14.48.tgz",
|
||||
"integrity": "sha512-BmaK/GfEE+5F2/QDrIXteFGKnVHGxlnK9MjdVKMTfvtmudjY3k2t8NtlY4qemKSizc+QwyombGWTBDc76rxePA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-riscv64/-/esbuild-linux-riscv64-0.14.49.tgz",
|
||||
"integrity": "sha512-h66ORBz+Dg+1KgLvzTVQEA1LX4XBd1SK0Fgbhhw4akpG/YkN8pS6OzYI/7SGENiN6ao5hETRDSkVcvU9NRtkMQ==",
|
||||
"cpu": [
|
||||
"riscv64"
|
||||
],
|
||||
@@ -2544,9 +2544,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-linux-s390x": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-s390x/-/esbuild-linux-s390x-0.14.48.tgz",
|
||||
"integrity": "sha512-tndw/0B9jiCL+KWKo0TSMaUm5UWBLsfCKVdbfMlb3d5LeV9WbijZ8Ordia8SAYv38VSJWOEt6eDCdOx8LqkC4g==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-s390x/-/esbuild-linux-s390x-0.14.49.tgz",
|
||||
"integrity": "sha512-DhrUoFVWD+XmKO1y7e4kNCqQHPs6twz6VV6Uezl/XHYGzM60rBewBF5jlZjG0nCk5W/Xy6y1xWeopkrhFFM0sQ==",
|
||||
"cpu": [
|
||||
"s390x"
|
||||
],
|
||||
@@ -2560,9 +2560,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-netbsd-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-netbsd-64/-/esbuild-netbsd-64-0.14.48.tgz",
|
||||
"integrity": "sha512-V9hgXfwf/T901Lr1wkOfoevtyNkrxmMcRHyticybBUHookznipMOHoF41Al68QBsqBxnITCEpjjd4yAos7z9Tw==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-netbsd-64/-/esbuild-netbsd-64-0.14.49.tgz",
|
||||
"integrity": "sha512-BXaUwFOfCy2T+hABtiPUIpWjAeWK9P8O41gR4Pg73hpzoygVGnj0nI3YK4SJhe52ELgtdgWP/ckIkbn2XaTxjQ==",
|
||||
"cpu": [
|
||||
"x64"
|
||||
],
|
||||
@@ -2576,9 +2576,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-openbsd-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-openbsd-64/-/esbuild-openbsd-64-0.14.48.tgz",
|
||||
"integrity": "sha512-+IHf4JcbnnBl4T52egorXMatil/za0awqzg2Vy6FBgPcBpisDWT2sVz/tNdrK9kAqj+GZG/jZdrOkj7wsrNTKA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-openbsd-64/-/esbuild-openbsd-64-0.14.49.tgz",
|
||||
"integrity": "sha512-lP06UQeLDGmVPw9Rg437Btu6J9/BmyhdoefnQ4gDEJTtJvKtQaUcOQrhjTq455ouZN4EHFH1h28WOJVANK41kA==",
|
||||
"cpu": [
|
||||
"x64"
|
||||
],
|
||||
@@ -2592,9 +2592,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-sunos-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-sunos-64/-/esbuild-sunos-64-0.14.48.tgz",
|
||||
"integrity": "sha512-77m8bsr5wOpOWbGi9KSqDphcq6dFeJyun8TA+12JW/GAjyfTwVtOnN8DOt6DSPUfEV+ltVMNqtXUeTeMAxl5KA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-sunos-64/-/esbuild-sunos-64-0.14.49.tgz",
|
||||
"integrity": "sha512-4c8Zowp+V3zIWje329BeLbGh6XI9c/rqARNaj5yPHdC61pHI9UNdDxT3rePPJeWcEZVKjkiAS6AP6kiITp7FSw==",
|
||||
"cpu": [
|
||||
"x64"
|
||||
],
|
||||
@@ -2608,9 +2608,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-windows-32": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-windows-32/-/esbuild-windows-32-0.14.48.tgz",
|
||||
"integrity": "sha512-EPgRuTPP8vK9maxpTGDe5lSoIBHGKO/AuxDncg5O3NkrPeLNdvvK8oywB0zGaAZXxYWfNNSHskvvDgmfVTguhg==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-windows-32/-/esbuild-windows-32-0.14.49.tgz",
|
||||
"integrity": "sha512-q7Rb+J9yHTeKr9QTPDYkqfkEj8/kcKz9lOabDuvEXpXuIcosWCJgo5Z7h/L4r7rbtTH4a8U2FGKb6s1eeOHmJA==",
|
||||
"cpu": [
|
||||
"ia32"
|
||||
],
|
||||
@@ -2624,9 +2624,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-windows-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-windows-64/-/esbuild-windows-64-0.14.48.tgz",
|
||||
"integrity": "sha512-YmpXjdT1q0b8ictSdGwH3M8VCoqPpK1/UArze3X199w6u8hUx3V8BhAi1WjbsfDYRBanVVtduAhh2sirImtAvA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-windows-64/-/esbuild-windows-64-0.14.49.tgz",
|
||||
"integrity": "sha512-+Cme7Ongv0UIUTniPqfTX6mJ8Deo7VXw9xN0yJEN1lQMHDppTNmKwAM3oGbD/Vqff+07K2gN0WfNkMohmG+dVw==",
|
||||
"cpu": [
|
||||
"x64"
|
||||
],
|
||||
@@ -2640,9 +2640,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/esbuild-windows-arm64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-windows-arm64/-/esbuild-windows-arm64-0.14.48.tgz",
|
||||
"integrity": "sha512-HHaOMCsCXp0rz5BT2crTka6MPWVno121NKApsGs/OIW5QC0ggC69YMGs1aJct9/9FSUF4A1xNE/cLvgB5svR4g==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-windows-arm64/-/esbuild-windows-arm64-0.14.49.tgz",
|
||||
"integrity": "sha512-v+HYNAXzuANrCbbLFJ5nmO3m5y2PGZWLe3uloAkLt87aXiO2mZr3BTmacZdjwNkNEHuH3bNtN8cak+mzVjVPfA==",
|
||||
"cpu": [
|
||||
"arm64"
|
||||
],
|
||||
@@ -3283,9 +3283,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/ip": {
|
||||
"version": "1.1.8",
|
||||
"resolved": "https://registry.npmjs.org/ip/-/ip-1.1.8.tgz",
|
||||
"integrity": "sha512-PuExPYUiu6qMBQb4l06ecm6T6ujzhmh+MeJcW9wa89PoAz5pvd4zPgN5WJV104mb6S2T1AwNIAaB70JNrLQWhg==",
|
||||
"version": "2.0.0",
|
||||
"resolved": "https://registry.npmjs.org/ip/-/ip-2.0.0.tgz",
|
||||
"integrity": "sha512-WKa+XuLG1A1R0UWhl2+1XQSi+fZWMsYKffMZTTYsiZaUD8k2yDAj5atimTUD2TZkyCkNEeYE5NhFZmupOGtjYQ==",
|
||||
"dev": true
|
||||
},
|
||||
"node_modules/is-arrayish": {
|
||||
@@ -4422,9 +4422,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/psl": {
|
||||
"version": "1.8.0",
|
||||
"resolved": "https://registry.npmjs.org/psl/-/psl-1.8.0.tgz",
|
||||
"integrity": "sha512-RIdOzyoavK+hA18OGGWDqUTsCLhtA7IcZ/6NCs4fFJaHBDab+pDDmDIByWFRQJq2Cd7r1OoQxBGKOaztq+hjIQ==",
|
||||
"version": "1.9.0",
|
||||
"resolved": "https://registry.npmjs.org/psl/-/psl-1.9.0.tgz",
|
||||
"integrity": "sha512-E/ZsdU4HLs/68gYzgGTkMicWTLPdAftJLfJFlLUAAKZGkStNU72sZjT66SnMDVOfOWY/YAoiD7Jxa9iHvngcag==",
|
||||
"dev": true
|
||||
},
|
||||
"node_modules/punycode": {
|
||||
@@ -4709,9 +4709,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/rollup": {
|
||||
"version": "2.75.7",
|
||||
"resolved": "https://registry.npmjs.org/rollup/-/rollup-2.75.7.tgz",
|
||||
"integrity": "sha512-VSE1iy0eaAYNCxEXaleThdFXqZJ42qDBatAwrfnPlENEZ8erQ+0LYX4JXOLPceWfZpV1VtZwZ3dFCuOZiSyFtQ==",
|
||||
"version": "2.77.0",
|
||||
"resolved": "https://registry.npmjs.org/rollup/-/rollup-2.77.0.tgz",
|
||||
"integrity": "sha512-vL8xjY4yOQEw79DvyXLijhnhh+R/O9zpF/LEgkCebZFtb6ELeN9H3/2T0r8+mp+fFTBHZ5qGpOpW2ela2zRt3g==",
|
||||
"dev": true,
|
||||
"bin": {
|
||||
"rollup": "dist/bin/rollup"
|
||||
@@ -4821,9 +4821,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/sass": {
|
||||
"version": "1.53.0",
|
||||
"resolved": "https://registry.npmjs.org/sass/-/sass-1.53.0.tgz",
|
||||
"integrity": "sha512-zb/oMirbKhUgRQ0/GFz8TSAwRq2IlR29vOUJZOx0l8sV+CkHUfHa4u5nqrG+1VceZp7Jfj59SVW9ogdhTvJDcQ==",
|
||||
"version": "1.54.0",
|
||||
"resolved": "https://registry.npmjs.org/sass/-/sass-1.54.0.tgz",
|
||||
"integrity": "sha512-C4zp79GCXZfK0yoHZg+GxF818/aclhp9F48XBu/+bm9vXEVAYov9iU3FBVRMq3Hx3OA4jfKL+p2K9180mEh0xQ==",
|
||||
"dev": true,
|
||||
"dependencies": {
|
||||
"chokidar": ">=3.0.0 <4.0.0",
|
||||
@@ -4952,12 +4952,12 @@
|
||||
}
|
||||
},
|
||||
"node_modules/socks": {
|
||||
"version": "2.6.2",
|
||||
"resolved": "https://registry.npmjs.org/socks/-/socks-2.6.2.tgz",
|
||||
"integrity": "sha512-zDZhHhZRY9PxRruRMR7kMhnf3I8hDs4S3f9RecfnGxvcBHQcKcIH/oUcEWffsfl1XxdYlA7nnlGbbTvPz9D8gA==",
|
||||
"version": "2.7.0",
|
||||
"resolved": "https://registry.npmjs.org/socks/-/socks-2.7.0.tgz",
|
||||
"integrity": "sha512-scnOe9y4VuiNUULJN72GrM26BNOjVsfPXI+j+98PkyEfsIXroa5ofyjT+FzGvn/xHs73U2JtoBYAVx9Hl4quSA==",
|
||||
"dev": true,
|
||||
"dependencies": {
|
||||
"ip": "^1.1.5",
|
||||
"ip": "^2.0.0",
|
||||
"smart-buffer": "^4.2.0"
|
||||
},
|
||||
"engines": {
|
||||
@@ -5245,9 +5245,9 @@
|
||||
}
|
||||
},
|
||||
"node_modules/svelte": {
|
||||
"version": "3.48.0",
|
||||
"resolved": "https://registry.npmjs.org/svelte/-/svelte-3.48.0.tgz",
|
||||
"integrity": "sha512-fN2YRm/bGumvjUpu6yI3BpvZnpIm9I6A7HR4oUNYd7ggYyIwSA/BX7DJ+UXXffLp6XNcUijyLvttbPVCYa/3xQ==",
|
||||
"version": "3.49.0",
|
||||
"resolved": "https://registry.npmjs.org/svelte/-/svelte-3.49.0.tgz",
|
||||
"integrity": "sha512-+lmjic1pApJWDfPCpUUTc1m8azDqYCG1JN9YEngrx/hUyIcFJo6VZhj0A1Ai0wqoHcEIuQy+e9tk+4uDgdtsFA==",
|
||||
"dev": true,
|
||||
"engines": {
|
||||
"node": ">= 8"
|
||||
@@ -5418,9 +5418,9 @@
|
||||
"dev": true
|
||||
},
|
||||
"node_modules/svelte2tsx": {
|
||||
"version": "0.5.11",
|
||||
"resolved": "https://registry.npmjs.org/svelte2tsx/-/svelte2tsx-0.5.11.tgz",
|
||||
"integrity": "sha512-Is95G1wqNvEUJZ9DITRS2zfMwVJRZztMduPs1vJJ0cm65WUg/avBl5vBXjHycQL/qmFpaqa3NG4qWnf7bCHPag==",
|
||||
"version": "0.5.12",
|
||||
"resolved": "https://registry.npmjs.org/svelte2tsx/-/svelte2tsx-0.5.12.tgz",
|
||||
"integrity": "sha512-43ayMivmh1IDCgb+4YDf54YuOJZGCUKFpp37RbfjGgNU+Pmb9HhP+zRXa1pMh4mwSTBfqZS0FbJZP3Q8CSxvvg==",
|
||||
"dev": true,
|
||||
"dependencies": {
|
||||
"dedent-js": "^1.0.1",
|
||||
@@ -5629,21 +5629,21 @@
|
||||
}
|
||||
},
|
||||
"node_modules/vite": {
|
||||
"version": "2.9.13",
|
||||
"resolved": "https://registry.npmjs.org/vite/-/vite-2.9.13.tgz",
|
||||
"integrity": "sha512-AsOBAaT0AD7Mhe8DuK+/kE4aWYFMx/i0ZNi98hJclxb4e0OhQcZYUrvLjIaQ8e59Ui7txcvKMiJC1yftqpQoDw==",
|
||||
"version": "3.0.2",
|
||||
"resolved": "https://registry.npmjs.org/vite/-/vite-3.0.2.tgz",
|
||||
"integrity": "sha512-TAqydxW/w0U5AoL5AsD9DApTvGb2iNbGs3sN4u2VdT1GFkQVUfgUldt+t08TZgi23uIauh1TUOQJALduo9GXqw==",
|
||||
"dev": true,
|
||||
"dependencies": {
|
||||
"esbuild": "^0.14.27",
|
||||
"postcss": "^8.4.13",
|
||||
"resolve": "^1.22.0",
|
||||
"rollup": "^2.59.0"
|
||||
"esbuild": "^0.14.47",
|
||||
"postcss": "^8.4.14",
|
||||
"resolve": "^1.22.1",
|
||||
"rollup": "^2.75.6"
|
||||
},
|
||||
"bin": {
|
||||
"vite": "bin/vite.js"
|
||||
},
|
||||
"engines": {
|
||||
"node": ">=12.2.0"
|
||||
"node": "^14.18.0 || >=16.0.0"
|
||||
},
|
||||
"optionalDependencies": {
|
||||
"fsevents": "~2.3.2"
|
||||
@@ -5651,7 +5651,8 @@
|
||||
"peerDependencies": {
|
||||
"less": "*",
|
||||
"sass": "*",
|
||||
"stylus": "*"
|
||||
"stylus": "*",
|
||||
"terser": "^5.4.0"
|
||||
},
|
||||
"peerDependenciesMeta": {
|
||||
"less": {
|
||||
@@ -5662,6 +5663,9 @@
|
||||
},
|
||||
"stylus": {
|
||||
"optional": true
|
||||
},
|
||||
"terser": {
|
||||
"optional": true
|
||||
}
|
||||
}
|
||||
},
|
||||
@@ -5882,9 +5886,9 @@
|
||||
"dev": true
|
||||
},
|
||||
"@jridgewell/resolve-uri": {
|
||||
"version": "3.0.8",
|
||||
"resolved": "https://registry.npmjs.org/@jridgewell/resolve-uri/-/resolve-uri-3.0.8.tgz",
|
||||
"integrity": "sha512-YK5G9LaddzGbcucK4c8h5tWFmMPBvRZ/uyWmN1/SbBdIvqGUdWGkJ5BAaccgs6XbzVLsqbPJrBSFwKv3kT9i7w==",
|
||||
"version": "3.1.0",
|
||||
"resolved": "https://registry.npmjs.org/@jridgewell/resolve-uri/-/resolve-uri-3.1.0.tgz",
|
||||
"integrity": "sha512-F2msla3tad+Mfht5cJq7LSXcdudKTWCVYUgw6pLFOOHSTtZlj6SWNYAp+AhuqLmWdBO2X5hPrLcu8cVP8fy28w==",
|
||||
"dev": true
|
||||
},
|
||||
"@jridgewell/sourcemap-codec": {
|
||||
@@ -7251,27 +7255,26 @@
|
||||
}
|
||||
},
|
||||
"@sveltejs/kit": {
|
||||
"version": "1.0.0-next.357",
|
||||
"resolved": "https://registry.npmjs.org/@sveltejs/kit/-/kit-1.0.0-next.357.tgz",
|
||||
"integrity": "sha512-nCAehVybIEpQNnPu61V/EFVdfDb1nBSiQUfW9EcSSDEUbyAMCVBOKZZuzQ0qQDp3xniqRkyDzpBA4wN+ADxHBw==",
|
||||
"version": "1.0.0-next.392",
|
||||
"resolved": "https://registry.npmjs.org/@sveltejs/kit/-/kit-1.0.0-next.392.tgz",
|
||||
"integrity": "sha512-od4rDJ/Soq0I7mda7sTbAnNKERHSDEGNa7QBpLA859xgBkwC1JnEIymYOh9dm+hMyHhB0bUoRoaur0qxKLqOOw==",
|
||||
"dev": true,
|
||||
"requires": {
|
||||
"@sveltejs/vite-plugin-svelte": "^1.0.0-next.48",
|
||||
"@sveltejs/vite-plugin-svelte": "^1.0.1",
|
||||
"chokidar": "^3.5.3",
|
||||
"sade": "^1.8.1",
|
||||
"vite": "^2.9.10"
|
||||
"sade": "^1.8.1"
|
||||
}
|
||||
},
|
||||
"@sveltejs/vite-plugin-svelte": {
|
||||
"version": "1.0.0-next.49",
|
||||
"resolved": "https://registry.npmjs.org/@sveltejs/vite-plugin-svelte/-/vite-plugin-svelte-1.0.0-next.49.tgz",
|
||||
"integrity": "sha512-AKh0Ka8EDgidnxWUs8Hh2iZLZovkETkefO99XxZ4sW4WGJ7VFeBx5kH/NIIGlaNHLcrIvK3CK0HkZwC3Cici0A==",
|
||||
"version": "1.0.1",
|
||||
"resolved": "https://registry.npmjs.org/@sveltejs/vite-plugin-svelte/-/vite-plugin-svelte-1.0.1.tgz",
|
||||
"integrity": "sha512-PorCgUounn0VXcpeJu+hOweZODKmGuLHsLomwqSj+p26IwjjGffmYQfVHtiTWq+NqaUuuHWWG7vPge6UFw4Aeg==",
|
||||
"dev": true,
|
||||
"requires": {
|
||||
"@rollup/pluginutils": "^4.2.1",
|
||||
"debug": "^4.3.4",
|
||||
"deepmerge": "^4.2.2",
|
||||
"kleur": "^4.1.4",
|
||||
"kleur": "^4.1.5",
|
||||
"magic-string": "^0.26.2",
|
||||
"svelte-hmr": "^0.14.12"
|
||||
}
|
||||
@@ -7295,9 +7298,9 @@
|
||||
"dev": true
|
||||
},
|
||||
"@types/node": {
|
||||
"version": "18.0.1",
|
||||
"resolved": "https://registry.npmjs.org/@types/node/-/node-18.0.1.tgz",
|
||||
"integrity": "sha512-CmR8+Tsy95hhwtZBKJBs0/FFq4XX7sDZHlGGf+0q+BRZfMbOTkzkj0AFAuTyXbObDIoanaBBW0+KEW+m3N16Wg==",
|
||||
"version": "18.0.6",
|
||||
"resolved": "https://registry.npmjs.org/@types/node/-/node-18.0.6.tgz",
|
||||
"integrity": "sha512-/xUq6H2aQm261exT6iZTMifUySEt4GR5KX8eYyY+C4MSNPqSh9oNIP7tz2GLKTlFaiBbgZNxffoR3CVRG+cljw==",
|
||||
"dev": true
|
||||
},
|
||||
"@types/normalize-package-data": {
|
||||
@@ -7858,170 +7861,170 @@
|
||||
"dev": true
|
||||
},
|
||||
"esbuild": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild/-/esbuild-0.14.48.tgz",
|
||||
"integrity": "sha512-w6N1Yn5MtqK2U1/WZTX9ZqUVb8IOLZkZ5AdHkT6x3cHDMVsYWC7WPdiLmx19w3i4Rwzy5LqsEMtVihG3e4rFzA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild/-/esbuild-0.14.49.tgz",
|
||||
"integrity": "sha512-/TlVHhOaq7Yz8N1OJrjqM3Auzo5wjvHFLk+T8pIue+fhnhIMpfAzsG6PLVMbFveVxqD2WOp3QHei+52IMUNmCw==",
|
||||
"dev": true,
|
||||
"requires": {
|
||||
"esbuild-android-64": "0.14.48",
|
||||
"esbuild-android-arm64": "0.14.48",
|
||||
"esbuild-darwin-64": "0.14.48",
|
||||
"esbuild-darwin-arm64": "0.14.48",
|
||||
"esbuild-freebsd-64": "0.14.48",
|
||||
"esbuild-freebsd-arm64": "0.14.48",
|
||||
"esbuild-linux-32": "0.14.48",
|
||||
"esbuild-linux-64": "0.14.48",
|
||||
"esbuild-linux-arm": "0.14.48",
|
||||
"esbuild-linux-arm64": "0.14.48",
|
||||
"esbuild-linux-mips64le": "0.14.48",
|
||||
"esbuild-linux-ppc64le": "0.14.48",
|
||||
"esbuild-linux-riscv64": "0.14.48",
|
||||
"esbuild-linux-s390x": "0.14.48",
|
||||
"esbuild-netbsd-64": "0.14.48",
|
||||
"esbuild-openbsd-64": "0.14.48",
|
||||
"esbuild-sunos-64": "0.14.48",
|
||||
"esbuild-windows-32": "0.14.48",
|
||||
"esbuild-windows-64": "0.14.48",
|
||||
"esbuild-windows-arm64": "0.14.48"
|
||||
"esbuild-android-64": "0.14.49",
|
||||
"esbuild-android-arm64": "0.14.49",
|
||||
"esbuild-darwin-64": "0.14.49",
|
||||
"esbuild-darwin-arm64": "0.14.49",
|
||||
"esbuild-freebsd-64": "0.14.49",
|
||||
"esbuild-freebsd-arm64": "0.14.49",
|
||||
"esbuild-linux-32": "0.14.49",
|
||||
"esbuild-linux-64": "0.14.49",
|
||||
"esbuild-linux-arm": "0.14.49",
|
||||
"esbuild-linux-arm64": "0.14.49",
|
||||
"esbuild-linux-mips64le": "0.14.49",
|
||||
"esbuild-linux-ppc64le": "0.14.49",
|
||||
"esbuild-linux-riscv64": "0.14.49",
|
||||
"esbuild-linux-s390x": "0.14.49",
|
||||
"esbuild-netbsd-64": "0.14.49",
|
||||
"esbuild-openbsd-64": "0.14.49",
|
||||
"esbuild-sunos-64": "0.14.49",
|
||||
"esbuild-windows-32": "0.14.49",
|
||||
"esbuild-windows-64": "0.14.49",
|
||||
"esbuild-windows-arm64": "0.14.49"
|
||||
}
|
||||
},
|
||||
"esbuild-android-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-android-64/-/esbuild-android-64-0.14.48.tgz",
|
||||
"integrity": "sha512-3aMjboap/kqwCUpGWIjsk20TtxVoKck8/4Tu19rubh7t5Ra0Yrpg30Mt1QXXlipOazrEceGeWurXKeFJgkPOUg==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-android-64/-/esbuild-android-64-0.14.49.tgz",
|
||||
"integrity": "sha512-vYsdOTD+yi+kquhBiFWl3tyxnj2qZJsl4tAqwhT90ktUdnyTizgle7TjNx6Ar1bN7wcwWqZ9QInfdk2WVagSww==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-android-arm64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-android-arm64/-/esbuild-android-arm64-0.14.48.tgz",
|
||||
"integrity": "sha512-vptI3K0wGALiDq+EvRuZotZrJqkYkN5282iAfcffjI5lmGG9G1ta/CIVauhY42MBXwEgDJkweiDcDMRLzBZC4g==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-android-arm64/-/esbuild-android-arm64-0.14.49.tgz",
|
||||
"integrity": "sha512-g2HGr/hjOXCgSsvQZ1nK4nW/ei8JUx04Li74qub9qWrStlysaVmadRyTVuW32FGIpLQyc5sUjjZopj49eGGM2g==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-darwin-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-darwin-64/-/esbuild-darwin-64-0.14.48.tgz",
|
||||
"integrity": "sha512-gGQZa4+hab2Va/Zww94YbshLuWteyKGD3+EsVon8EWTWhnHFRm5N9NbALNbwi/7hQ/hM1Zm4FuHg+k6BLsl5UA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-darwin-64/-/esbuild-darwin-64-0.14.49.tgz",
|
||||
"integrity": "sha512-3rvqnBCtX9ywso5fCHixt2GBCUsogNp9DjGmvbBohh31Ces34BVzFltMSxJpacNki96+WIcX5s/vum+ckXiLYg==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-darwin-arm64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-darwin-arm64/-/esbuild-darwin-arm64-0.14.48.tgz",
|
||||
"integrity": "sha512-bFjnNEXjhZT+IZ8RvRGNJthLWNHV5JkCtuOFOnjvo5pC0sk2/QVk0Qc06g2PV3J0TcU6kaPC3RN9yy9w2PSLEA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-darwin-arm64/-/esbuild-darwin-arm64-0.14.49.tgz",
|
||||
"integrity": "sha512-XMaqDxO846srnGlUSJnwbijV29MTKUATmOLyQSfswbK/2X5Uv28M9tTLUJcKKxzoo9lnkYPsx2o8EJcTYwCs/A==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-freebsd-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-freebsd-64/-/esbuild-freebsd-64-0.14.48.tgz",
|
||||
"integrity": "sha512-1NOlwRxmOsnPcWOGTB10JKAkYSb2nue0oM1AfHWunW/mv3wERfJmnYlGzL3UAOIUXZqW8GeA2mv+QGwq7DToqA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-freebsd-64/-/esbuild-freebsd-64-0.14.49.tgz",
|
||||
"integrity": "sha512-NJ5Q6AjV879mOHFri+5lZLTp5XsO2hQ+KSJYLbfY9DgCu8s6/Zl2prWXVANYTeCDLlrIlNNYw8y34xqyLDKOmQ==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-freebsd-arm64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-freebsd-arm64/-/esbuild-freebsd-arm64-0.14.48.tgz",
|
||||
"integrity": "sha512-gXqKdO8wabVcYtluAbikDH2jhXp+Klq5oCD5qbVyUG6tFiGhrC9oczKq3vIrrtwcxDQqK6+HDYK8Zrd4bCA9Gw==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-freebsd-arm64/-/esbuild-freebsd-arm64-0.14.49.tgz",
|
||||
"integrity": "sha512-lFLtgXnAc3eXYqj5koPlBZvEbBSOSUbWO3gyY/0+4lBdRqELyz4bAuamHvmvHW5swJYL7kngzIZw6kdu25KGOA==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-linux-32": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-32/-/esbuild-linux-32-0.14.48.tgz",
|
||||
"integrity": "sha512-ghGyDfS289z/LReZQUuuKq9KlTiTspxL8SITBFQFAFRA/IkIvDpnZnCAKTCjGXAmUqroMQfKJXMxyjJA69c/nQ==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-32/-/esbuild-linux-32-0.14.49.tgz",
|
||||
"integrity": "sha512-zTTH4gr2Kb8u4QcOpTDVn7Z8q7QEIvFl/+vHrI3cF6XOJS7iEI1FWslTo3uofB2+mn6sIJEQD9PrNZKoAAMDiA==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-linux-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-64/-/esbuild-linux-64-0.14.48.tgz",
|
||||
"integrity": "sha512-vni3p/gppLMVZLghI7oMqbOZdGmLbbKR23XFARKnszCIBpEMEDxOMNIKPmMItQrmH/iJrL1z8Jt2nynY0bE1ug==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-64/-/esbuild-linux-64-0.14.49.tgz",
|
||||
"integrity": "sha512-hYmzRIDzFfLrB5c1SknkxzM8LdEUOusp6M2TnuQZJLRtxTgyPnZZVtyMeCLki0wKgYPXkFsAVhi8vzo2mBNeTg==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-linux-arm": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-arm/-/esbuild-linux-arm-0.14.48.tgz",
|
||||
"integrity": "sha512-+VfSV7Akh1XUiDNXgqgY1cUP1i2vjI+BmlyXRfVz5AfV3jbpde8JTs5Q9sYgaoq5cWfuKfoZB/QkGOI+QcL1Tw==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-arm/-/esbuild-linux-arm-0.14.49.tgz",
|
||||
"integrity": "sha512-iE3e+ZVv1Qz1Sy0gifIsarJMQ89Rpm9mtLSRtG3AH0FPgAzQ5Z5oU6vYzhc/3gSPi2UxdCOfRhw2onXuFw/0lg==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-linux-arm64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-arm64/-/esbuild-linux-arm64-0.14.48.tgz",
|
||||
"integrity": "sha512-3CFsOlpoxlKPRevEHq8aAntgYGYkE1N9yRYAcPyng/p4Wyx0tPR5SBYsxLKcgPB9mR8chHEhtWYz6EZ+H199Zw==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-arm64/-/esbuild-linux-arm64-0.14.49.tgz",
|
||||
"integrity": "sha512-KLQ+WpeuY+7bxukxLz5VgkAAVQxUv67Ft4DmHIPIW+2w3ObBPQhqNoeQUHxopoW/aiOn3m99NSmSV+bs4BSsdA==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-linux-mips64le": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-mips64le/-/esbuild-linux-mips64le-0.14.48.tgz",
|
||||
"integrity": "sha512-cs0uOiRlPp6ymknDnjajCgvDMSsLw5mST2UXh+ZIrXTj2Ifyf2aAP3Iw4DiqgnyYLV2O/v/yWBJx+WfmKEpNLA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-mips64le/-/esbuild-linux-mips64le-0.14.49.tgz",
|
||||
"integrity": "sha512-n+rGODfm8RSum5pFIqFQVQpYBw+AztL8s6o9kfx7tjfK0yIGF6tm5HlG6aRjodiiKkH2xAiIM+U4xtQVZYU4rA==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-linux-ppc64le": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-ppc64le/-/esbuild-linux-ppc64le-0.14.48.tgz",
|
||||
"integrity": "sha512-+2F0vJMkuI0Wie/wcSPDCqXvSFEELH7Jubxb7mpWrA/4NpT+/byjxDz0gG6R1WJoeDefcrMfpBx4GFNN1JQorQ==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-ppc64le/-/esbuild-linux-ppc64le-0.14.49.tgz",
|
||||
"integrity": "sha512-WP9zR4HX6iCBmMFH+XHHng2LmdoIeUmBpL4aL2TR8ruzXyT4dWrJ5BSbT8iNo6THN8lod6GOmYDLq/dgZLalGw==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-linux-riscv64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-riscv64/-/esbuild-linux-riscv64-0.14.48.tgz",
|
||||
"integrity": "sha512-BmaK/GfEE+5F2/QDrIXteFGKnVHGxlnK9MjdVKMTfvtmudjY3k2t8NtlY4qemKSizc+QwyombGWTBDc76rxePA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-riscv64/-/esbuild-linux-riscv64-0.14.49.tgz",
|
||||
"integrity": "sha512-h66ORBz+Dg+1KgLvzTVQEA1LX4XBd1SK0Fgbhhw4akpG/YkN8pS6OzYI/7SGENiN6ao5hETRDSkVcvU9NRtkMQ==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-linux-s390x": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-s390x/-/esbuild-linux-s390x-0.14.48.tgz",
|
||||
"integrity": "sha512-tndw/0B9jiCL+KWKo0TSMaUm5UWBLsfCKVdbfMlb3d5LeV9WbijZ8Ordia8SAYv38VSJWOEt6eDCdOx8LqkC4g==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-linux-s390x/-/esbuild-linux-s390x-0.14.49.tgz",
|
||||
"integrity": "sha512-DhrUoFVWD+XmKO1y7e4kNCqQHPs6twz6VV6Uezl/XHYGzM60rBewBF5jlZjG0nCk5W/Xy6y1xWeopkrhFFM0sQ==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-netbsd-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-netbsd-64/-/esbuild-netbsd-64-0.14.48.tgz",
|
||||
"integrity": "sha512-V9hgXfwf/T901Lr1wkOfoevtyNkrxmMcRHyticybBUHookznipMOHoF41Al68QBsqBxnITCEpjjd4yAos7z9Tw==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-netbsd-64/-/esbuild-netbsd-64-0.14.49.tgz",
|
||||
"integrity": "sha512-BXaUwFOfCy2T+hABtiPUIpWjAeWK9P8O41gR4Pg73hpzoygVGnj0nI3YK4SJhe52ELgtdgWP/ckIkbn2XaTxjQ==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-openbsd-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-openbsd-64/-/esbuild-openbsd-64-0.14.48.tgz",
|
||||
"integrity": "sha512-+IHf4JcbnnBl4T52egorXMatil/za0awqzg2Vy6FBgPcBpisDWT2sVz/tNdrK9kAqj+GZG/jZdrOkj7wsrNTKA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-openbsd-64/-/esbuild-openbsd-64-0.14.49.tgz",
|
||||
"integrity": "sha512-lP06UQeLDGmVPw9Rg437Btu6J9/BmyhdoefnQ4gDEJTtJvKtQaUcOQrhjTq455ouZN4EHFH1h28WOJVANK41kA==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-sunos-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-sunos-64/-/esbuild-sunos-64-0.14.48.tgz",
|
||||
"integrity": "sha512-77m8bsr5wOpOWbGi9KSqDphcq6dFeJyun8TA+12JW/GAjyfTwVtOnN8DOt6DSPUfEV+ltVMNqtXUeTeMAxl5KA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-sunos-64/-/esbuild-sunos-64-0.14.49.tgz",
|
||||
"integrity": "sha512-4c8Zowp+V3zIWje329BeLbGh6XI9c/rqARNaj5yPHdC61pHI9UNdDxT3rePPJeWcEZVKjkiAS6AP6kiITp7FSw==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-windows-32": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-windows-32/-/esbuild-windows-32-0.14.48.tgz",
|
||||
"integrity": "sha512-EPgRuTPP8vK9maxpTGDe5lSoIBHGKO/AuxDncg5O3NkrPeLNdvvK8oywB0zGaAZXxYWfNNSHskvvDgmfVTguhg==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-windows-32/-/esbuild-windows-32-0.14.49.tgz",
|
||||
"integrity": "sha512-q7Rb+J9yHTeKr9QTPDYkqfkEj8/kcKz9lOabDuvEXpXuIcosWCJgo5Z7h/L4r7rbtTH4a8U2FGKb6s1eeOHmJA==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-windows-64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-windows-64/-/esbuild-windows-64-0.14.48.tgz",
|
||||
"integrity": "sha512-YmpXjdT1q0b8ictSdGwH3M8VCoqPpK1/UArze3X199w6u8hUx3V8BhAi1WjbsfDYRBanVVtduAhh2sirImtAvA==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-windows-64/-/esbuild-windows-64-0.14.49.tgz",
|
||||
"integrity": "sha512-+Cme7Ongv0UIUTniPqfTX6mJ8Deo7VXw9xN0yJEN1lQMHDppTNmKwAM3oGbD/Vqff+07K2gN0WfNkMohmG+dVw==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
"esbuild-windows-arm64": {
|
||||
"version": "0.14.48",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-windows-arm64/-/esbuild-windows-arm64-0.14.48.tgz",
|
||||
"integrity": "sha512-HHaOMCsCXp0rz5BT2crTka6MPWVno121NKApsGs/OIW5QC0ggC69YMGs1aJct9/9FSUF4A1xNE/cLvgB5svR4g==",
|
||||
"version": "0.14.49",
|
||||
"resolved": "https://registry.npmjs.org/esbuild-windows-arm64/-/esbuild-windows-arm64-0.14.49.tgz",
|
||||
"integrity": "sha512-v+HYNAXzuANrCbbLFJ5nmO3m5y2PGZWLe3uloAkLt87aXiO2mZr3BTmacZdjwNkNEHuH3bNtN8cak+mzVjVPfA==",
|
||||
"dev": true,
|
||||
"optional": true
|
||||
},
|
||||
@@ -8505,9 +8508,9 @@
|
||||
}
|
||||
},
|
||||
"ip": {
|
||||
"version": "1.1.8",
|
||||
"resolved": "https://registry.npmjs.org/ip/-/ip-1.1.8.tgz",
|
||||
"integrity": "sha512-PuExPYUiu6qMBQb4l06ecm6T6ujzhmh+MeJcW9wa89PoAz5pvd4zPgN5WJV104mb6S2T1AwNIAaB70JNrLQWhg==",
|
||||
"version": "2.0.0",
|
||||
"resolved": "https://registry.npmjs.org/ip/-/ip-2.0.0.tgz",
|
||||
"integrity": "sha512-WKa+XuLG1A1R0UWhl2+1XQSi+fZWMsYKffMZTTYsiZaUD8k2yDAj5atimTUD2TZkyCkNEeYE5NhFZmupOGtjYQ==",
|
||||
"dev": true
|
||||
},
|
||||
"is-arrayish": {
|
||||
@@ -9352,9 +9355,9 @@
|
||||
}
|
||||
},
|
||||
"psl": {
|
||||
"version": "1.8.0",
|
||||
"resolved": "https://registry.npmjs.org/psl/-/psl-1.8.0.tgz",
|
||||
"integrity": "sha512-RIdOzyoavK+hA18OGGWDqUTsCLhtA7IcZ/6NCs4fFJaHBDab+pDDmDIByWFRQJq2Cd7r1OoQxBGKOaztq+hjIQ==",
|
||||
"version": "1.9.0",
|
||||
"resolved": "https://registry.npmjs.org/psl/-/psl-1.9.0.tgz",
|
||||
"integrity": "sha512-E/ZsdU4HLs/68gYzgGTkMicWTLPdAftJLfJFlLUAAKZGkStNU72sZjT66SnMDVOfOWY/YAoiD7Jxa9iHvngcag==",
|
||||
"dev": true
|
||||
},
|
||||
"punycode": {
|
||||
@@ -9558,9 +9561,9 @@
|
||||
}
|
||||
},
|
||||
"rollup": {
|
||||
"version": "2.75.7",
|
||||
"resolved": "https://registry.npmjs.org/rollup/-/rollup-2.75.7.tgz",
|
||||
"integrity": "sha512-VSE1iy0eaAYNCxEXaleThdFXqZJ42qDBatAwrfnPlENEZ8erQ+0LYX4JXOLPceWfZpV1VtZwZ3dFCuOZiSyFtQ==",
|
||||
"version": "2.77.0",
|
||||
"resolved": "https://registry.npmjs.org/rollup/-/rollup-2.77.0.tgz",
|
||||
"integrity": "sha512-vL8xjY4yOQEw79DvyXLijhnhh+R/O9zpF/LEgkCebZFtb6ELeN9H3/2T0r8+mp+fFTBHZ5qGpOpW2ela2zRt3g==",
|
||||
"dev": true,
|
||||
"requires": {
|
||||
"fsevents": "~2.3.2"
|
||||
@@ -9629,9 +9632,9 @@
|
||||
}
|
||||
},
|
||||
"sass": {
|
||||
"version": "1.53.0",
|
||||
"resolved": "https://registry.npmjs.org/sass/-/sass-1.53.0.tgz",
|
||||
"integrity": "sha512-zb/oMirbKhUgRQ0/GFz8TSAwRq2IlR29vOUJZOx0l8sV+CkHUfHa4u5nqrG+1VceZp7Jfj59SVW9ogdhTvJDcQ==",
|
||||
"version": "1.54.0",
|
||||
"resolved": "https://registry.npmjs.org/sass/-/sass-1.54.0.tgz",
|
||||
"integrity": "sha512-C4zp79GCXZfK0yoHZg+GxF818/aclhp9F48XBu/+bm9vXEVAYov9iU3FBVRMq3Hx3OA4jfKL+p2K9180mEh0xQ==",
|
||||
"dev": true,
|
||||
"requires": {
|
||||
"chokidar": ">=3.0.0 <4.0.0",
|
||||
@@ -9726,12 +9729,12 @@
|
||||
}
|
||||
},
|
||||
"socks": {
|
||||
"version": "2.6.2",
|
||||
"resolved": "https://registry.npmjs.org/socks/-/socks-2.6.2.tgz",
|
||||
"integrity": "sha512-zDZhHhZRY9PxRruRMR7kMhnf3I8hDs4S3f9RecfnGxvcBHQcKcIH/oUcEWffsfl1XxdYlA7nnlGbbTvPz9D8gA==",
|
||||
"version": "2.7.0",
|
||||
"resolved": "https://registry.npmjs.org/socks/-/socks-2.7.0.tgz",
|
||||
"integrity": "sha512-scnOe9y4VuiNUULJN72GrM26BNOjVsfPXI+j+98PkyEfsIXroa5ofyjT+FzGvn/xHs73U2JtoBYAVx9Hl4quSA==",
|
||||
"dev": true,
|
||||
"requires": {
|
||||
"ip": "^1.1.5",
|
||||
"ip": "^2.0.0",
|
||||
"smart-buffer": "^4.2.0"
|
||||
}
|
||||
},
|
||||
@@ -9967,9 +9970,9 @@
|
||||
"dev": true
|
||||
},
|
||||
"svelte": {
|
||||
"version": "3.48.0",
|
||||
"resolved": "https://registry.npmjs.org/svelte/-/svelte-3.48.0.tgz",
|
||||
"integrity": "sha512-fN2YRm/bGumvjUpu6yI3BpvZnpIm9I6A7HR4oUNYd7ggYyIwSA/BX7DJ+UXXffLp6XNcUijyLvttbPVCYa/3xQ==",
|
||||
"version": "3.49.0",
|
||||
"resolved": "https://registry.npmjs.org/svelte/-/svelte-3.49.0.tgz",
|
||||
"integrity": "sha512-+lmjic1pApJWDfPCpUUTc1m8azDqYCG1JN9YEngrx/hUyIcFJo6VZhj0A1Ai0wqoHcEIuQy+e9tk+4uDgdtsFA==",
|
||||
"dev": true
|
||||
},
|
||||
"svelte-check": {
|
||||
@@ -10076,9 +10079,9 @@
|
||||
"dev": true
|
||||
},
|
||||
"svelte2tsx": {
|
||||
"version": "0.5.11",
|
||||
"resolved": "https://registry.npmjs.org/svelte2tsx/-/svelte2tsx-0.5.11.tgz",
|
||||
"integrity": "sha512-Is95G1wqNvEUJZ9DITRS2zfMwVJRZztMduPs1vJJ0cm65WUg/avBl5vBXjHycQL/qmFpaqa3NG4qWnf7bCHPag==",
|
||||
"version": "0.5.12",
|
||||
"resolved": "https://registry.npmjs.org/svelte2tsx/-/svelte2tsx-0.5.12.tgz",
|
||||
"integrity": "sha512-43ayMivmh1IDCgb+4YDf54YuOJZGCUKFpp37RbfjGgNU+Pmb9HhP+zRXa1pMh4mwSTBfqZS0FbJZP3Q8CSxvvg==",
|
||||
"dev": true,
|
||||
"requires": {
|
||||
"dedent-js": "^1.0.1",
|
||||
@@ -10245,16 +10248,16 @@
|
||||
}
|
||||
},
|
||||
"vite": {
|
||||
"version": "2.9.13",
|
||||
"resolved": "https://registry.npmjs.org/vite/-/vite-2.9.13.tgz",
|
||||
"integrity": "sha512-AsOBAaT0AD7Mhe8DuK+/kE4aWYFMx/i0ZNi98hJclxb4e0OhQcZYUrvLjIaQ8e59Ui7txcvKMiJC1yftqpQoDw==",
|
||||
"version": "3.0.2",
|
||||
"resolved": "https://registry.npmjs.org/vite/-/vite-3.0.2.tgz",
|
||||
"integrity": "sha512-TAqydxW/w0U5AoL5AsD9DApTvGb2iNbGs3sN4u2VdT1GFkQVUfgUldt+t08TZgi23uIauh1TUOQJALduo9GXqw==",
|
||||
"dev": true,
|
||||
"requires": {
|
||||
"esbuild": "^0.14.27",
|
||||
"esbuild": "^0.14.47",
|
||||
"fsevents": "~2.3.2",
|
||||
"postcss": "^8.4.13",
|
||||
"resolve": "^1.22.0",
|
||||
"rollup": "^2.59.0"
|
||||
"postcss": "^8.4.14",
|
||||
"resolve": "^1.22.1",
|
||||
"rollup": "^2.75.6"
|
||||
}
|
||||
},
|
||||
"webidl-conversions": {
|
||||
|
||||
@@ -11,20 +11,20 @@
|
||||
"check": "svelte-check --tsconfig ./tsconfig.json"
|
||||
},
|
||||
"devDependencies": {
|
||||
"@sveltejs/kit": "^1.0.0-next.357",
|
||||
"@sveltejs/vite-plugin-svelte": "^1.0.0-next.49",
|
||||
"@sveltejs/kit": "^1.0.0-next.392",
|
||||
"@sveltejs/vite-plugin-svelte": "^1.0.1",
|
||||
"@tsconfig/svelte": "^3.0.0",
|
||||
"node-sass": "^7.0.1",
|
||||
"polyfill-object.fromentries": "^1.0.1",
|
||||
"smui-theme": "^6.0.0-beta.16",
|
||||
"string.prototype.matchall": "^4.0.7",
|
||||
"svelte": "^3.48.0",
|
||||
"svelte": "^3.49.0",
|
||||
"svelte-check": "^2.8.0",
|
||||
"svelte-material-ui": "^6.0.0-beta.16",
|
||||
"svelte-preprocess": "^4.10.7",
|
||||
"svelte-tiny-virtual-list": "^2.0.5",
|
||||
"tslib": "^2.4.0",
|
||||
"typescript": "^4.7.4",
|
||||
"vite": "^2.9.13"
|
||||
"vite": "^3.0.2"
|
||||
}
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user