OneFinity CNC Controller Firmware (A-axis fork)

This is the community-fork firmware (V09 UI, FA6, cold-boot work, macOS dev tooling) with a virtual A axis driven by an auxcnc ESP32 over USB serial. See docs/AUX_A_AXIS.md for the design and config.

Layout

src/avr/        AVR firmware (motion controller, AtxMega)
src/boot/       AVR bootloader
src/bbserial/   Linux kernel module for the bbserial driver
src/py/bbctrl/  Python control daemon (Tornado + websockets)
src/js/         Vue.js UI (legacy)
src/svelte-components/  Newer Svelte UI for dialogs and settings
src/pug/        Pug templates compiled into build/http/index.html
src/resources/  Static assets and config templates
scripts/        Install / update / RPi build helpers
docs/           Architecture, dev setup, A-axis docs

Build & flash (quick path, macOS or Linux)

The full build (make) requires avr-gcc, but the controller and UI only depend on the Python + web parts. If you're shipping a UI/Python change you don't need the AVR toolchain.

Prerequisites

• Node.js (any recent LTS) with npm
• Python 3 with setuptools
• npm install once at the project root (this is wired into the node_modules Make target, but on a fresh checkout it's clearer to do it explicitly)

npm install
(cd src/svelte-components && npm install)

macOS gotcha: esbuild platform pin

The Pi build leaves node_modules/esbuild pinned to linux-arm64, which won't run on Darwin. If npm run build inside src/svelte-components complains about esbuild, reinstall it for the host:

cd src/svelte-components
rm -rf node_modules/esbuild
npm install esbuild@0.14.49 --no-save

(Use the version that matches package-lock.json.)

Build the web UI + Python sdist

# Build the Svelte components
(cd src/svelte-components && npm run build)

# Render pug templates and copy assets into build/http
make all          # AVR step will fail without avr-gcc; safe to ignore
                  # if you didn't change anything under src/avr or src/boot

# Package
./setup.py sdist
ls dist/bbctrl-*.tar.bz2

make pkg is the canonical target but it tries to build AVR first. On hosts without avr-gcc, run the steps above directly.

If bbctrl-*.tar.bz2 is missing src/bbserial/bbserial.ko, copy the prebuilt .ko from a previous official release into src/bbserial/ before running setup.py sdist (the install script on the controller just installs the existing module if a newer one isn't shipped).

Flash to a controller

curl -X PUT -H "Content-Type: multipart/form-data" \
  -F "firmware=@dist/bbctrl-1.6.7.tar.bz2" \
  -F "password=onefinity" \
  http://onefinity.local/api/firmware/update

…or use the Make target:

make update HOST=onefinity.local PASSWORD=onefinity

The controller stops bbctrl, untars the package, runs scripts/install.sh, and brings the service back up. Total downtime is ~30-45s. Watch progress at http://<host>/ (you'll get 404s while bbctrl restarts, then the new UI).

Verify the flash

curl -s http://onefinity.local/ | grep -c "OneFinity"
curl -s http://onefinity.local/api/diag/timing | head
curl -s http://onefinity.local/api/aux/status   # if A axis is enabled

Build & flash (full path, Debian/Linux)

For AVR + GPlan rebuilds, see docs/development.md. That path uses qemu + chroot to cross-compile gplan for ARM and needs the gcc-avr / avr-libc toolchain.

A axis (auxcnc)

This fork adds a virtual A axis. See docs/AUX_A_AXIS.md for:

• G-code surface (G28 A0, G1 A25, etc.)
• The G-code preprocessor and hook architecture
• aux.json keys
• REST API (/api/aux/*)
• UI surface (jog row in Control, settings panel in Settings)
• Edge cases (ESP reboot mid-job, limit closed at home start, …)